|
|
|
|
|
P6 Indoor Full-color LED display |
|
|
Technical Parameters of Indoor Full-color Display PH6 (Module & Panel)
Item Technical parameters
Dot Pitch 6 mm
Pixel density 27777dots/㎡
Panel Dimension 768mm*576mm (128pixel*96pixel)
Module Dimension 192mm(W)*192mm(H)
Module Resolution 32pixel(W)*32pixel(H)
Viewing angle-Horizontal 160(+80/-80) degree
Viewing angle-Vertical 90(+45/-45) degree
Colour temperature 3500-9500 degree K(adjustable)
Brightness 1400 Nit
Calibrate Brightness 1200 Nit(6500 degree K )
Colour coordinate error(Full White) ≤0.002
Contrast ratio 200:1
Minimum Viewing distance 7 m
Max power consumption 1300 W/㎡
Average power consumption 600W/㎡
Drive type 1/8scan ,constant current (1/4scan,1/2scan and static are optional)
Frame frequency(Hz) ≥60
Refresh rate(Hz) ≥480
Grey scale (linear) levels 1024 gray scale levels for each color , 10bit
Color processing 1.07billion
LED encapsulation type PLCC-4 SMD CHIP 0603 SMD
Pixel constitution 1R,1G,1B
Red wavelength(dominant) 625 nm (+2.5nm/-2.5nm)
Green wavelength(dominant) 525 nm (+2.5nm/-2.5nm)
Blue wavelength(dominant) 470 nm (+2.5nm/-2.5nm)
Brightness'adjustment Manul:256 gray scale levels for each color are adjustable Automatic:8 gray scale levels for each color
Input signal RF,S-VIDEO,rgb,RGBTV,YUT,YC,COMPOSITION
Display model VGA hardware mapping/NTSC/PAL
Control system PCTV non-linear edit card +DVI card+control card +optical fiber transpot(optional)
International Protection IP20
Malfunction dot rate < 0.0001
Life-span( Full white half brightness) 50000hours
Life-span(working normally) 80000hours
MTBF 5000hours
Temperature range -20℃~40℃
Humidity 35%-85%
Flatness Clearance between pixels:≤0.2mm; Clearance between modules:≤0.4mm
|