Components of Steel Cord (Fabric Cord) Conveyor Belt Press Line:
1. Hydraulic pressure system: Under PLC control, it can realize auto mould closing, exhausting, mould opening and unloading.
2. In-phase balance mechanism: It can ensure the horizontal lifting of the platform.
3. Mould-closing guild device: It is installed on the both sides of lower mat platform. The deckle board and the platform are also equipped with guiding seats.
4. Mould-opening servounit: During the mould opening, the four cylinders below the platform will pull down the platform to avoid mould sticking.

Features of Steel Cord (Fabric Cord) Conveyor Belt Press Line:
1. These curing sets adopt PLC and touch screen control. Manuel control and auto control are all available.
2. The hydraulic cylinder is made of ZG270-500 and uses YX sealing ring; the plunger piston adopts closed-grained chilled alloy cast iron and is accurately grinded after casting.
3. The guard edge of heating platen employs hydraulic automatic prop up iron, and there are anti-superpose sizing block device at both sides of the platen.
4. Each heating area of the platen introduces a set of temperature control valve to guarantee the even temperature of the area under PLC control.

Functions of Steel Cord (Fabric Cord) Conveyor Belt Press Line:
Our curing sets are suitable for curing the steel cord (fabric cord) conveyor sets.

Besides these steel wire conveyor belt platen curing sets, other rubber machinery is also supplied by QDRM, including tyre building machine, rubber mixing mill, tyre shaping curing machine etc.