SP-11 is a new one-pack Vinyl resin wall coating system with the follow properties:
Innocuous, harmless for surroundings.
Very high chemical resistance.
Anti-mildew, anti-alga under the high temperature, high humidity and more glucide surroundings.
Excellent abrasion resistance.
Application areas
Conditions requiring the maximum of chemical resistance, health and safety and protection of surfaces subject to impact. It is ideal for:
Chemical industries.
Food and drink plants.
Pharmaceutical and cosmetic plants.
Packing and colours
SP-11 Part A: 15kg containers.
SP-11 Part B: 15kg containers.
SP-11 is available in large range of colors. For available colors, please refer tocolor chart.
Product description
SP-11 is a new one-pack Vinyl resin wall coating system with the
following properties:
l Innocuous, harmless for surroundings;
l Very high chemical resistance;
l Anti-mildew, anti-algae under the high temperatures, high
humidity and more glucide
surroundings.
l Excellent abrasion resistance.
Application areas
For conditions requiring the maximum of chemical resistance, health
and safety and
protection of surfaces subject to impact. It is ideal for:
l Chemical industries.
l Food and drink plants
l Pharmaceutical and cosmetic plants.
Resistance to chemicals etc
Anti-10% sulfuric acid No change in 55 days
Anti-10% sodium hydroxide No change in 55 days
Anti-3% salt water No change in 55 days
Water resistance No change in 48 hours
Application instructions
Surface preparation
l The compressive strength of the concrete substrate should not be
less than 25N/mm2,
the best application temperature is between 10--25.The air humidity
must not be
higher than 80%, the moisture content of the substrate shall not be
higher than 8.
l Correct substrate preparation is critical for optimum
performance. Surfaces should be
sound, clean, dry and free from loose particles, oil, grease, and
all other
contaminants
l Remove oil, grease by scrubbing. Cement laitance, loose
particles, pitch and other
contaminant must be removed from the surface by sand-blasting. The
alkalinity and
porosity of the surface must also be considered when painting.
l Fill surface cracks with Epoxy-Reinforced Solvent-Free repair
mortar to achieve a
level surface.