Optical video transmitter and receiver are designed to extend the coaxial limit of 500 meters and gets CCTV signals connected to 80km max on fiber optics. Also refer to as fiber converters, media converters, optical video converters, Optical video transmitter and receiver are a pair of CCTV transmission devices that transmit and receive high fidelity CCTV signals of video, audio, data, telephone, contact closure, Ethernet, etc. With advanced optical transmission technology which enables efficient transmission with minimum disturbance. And the plug-and-play design enables simple installation.
Olycom OM600 series of optical transmitter and receiver has various ordering options to meet customer's diversified requirements. It offers rich combined transmission options of 1 / 2 / 4 / 8 /16 and up to 64 video channels with many RS485/RS422/RS232 data / PTZ data, audio, contact closure / alarm, telephone, Ethernet channels, all transmitting over 1 bi-directional fiber cable with the application of Wavelength Division Multiplexing (WDM) technology.
Same with Ethernet media converters, optical video transmitter and receiver's flexibility can me optimized with the application of SFP transceiver.
Optical video transmitter and receiver types range from small standalone devices to high port-density chassis systems that offer advanced features for centralized management.
Opitcal: | |
Output/Input Wavelength | 1310nm& 1470nm~1610nm |
Output Power | -8~3dBm |
Optic fiber | 50/125u multimode, 62.5/125u multimode, 9/125u single mode |
Rx sensitivity | -30dBm |
Optical interface | FC, ST, SC(optional) |
Video: | |
Number of Channels | 1, 2, 4, 8, 16, ... |
Input/output impedance | BNC 75Ω (unbalance) |
Standard video input/output voltage | 2.0Vp-p |
Video voltage range | 0.6~2.0Vp-p |
Differential Gain | < ± 1% |
Differential Phase | < ± 1 |
S/N ratio | > 60dB(weighting)(8 bit) > 70dB(weighting)(10 bit) |
Connector | BNC |
Audio: | |
Audio Input/output Impedance | 600ohm(unbalance) |
Max input/output voltage | 2.0Vp-p |
Frequency Response | 10~20kHz |
Total Harmonic Distortion | < 0.05% |
S/N ratio | > 95dB(weighting) |
Connector | Standard terminal lead |
Data: | |
Data protocol | RS232, RS422, RS485, Manchester, BIPHASE data |
Data rate | 0~300kbps |
Error rate | 10e -9 |
Connector | Standard terminal lead |
Ethernet: | |
Work mode | Full duplex/half duplex |
Network speed | 10/100Mbps(AUTO) |
connection terminal | RJ45 |
Telephone: | |
Connector | Standard RJ11 |
Phonetic bandwidth | 8KHz |
Work mode | Point to point hot line, program controlling switch/extension mode |
Distortion | < 1% |
S/N ratio | > 95dB |
Binary input/Output: | |
Connector | Terminal lead |
Signal input | alarm, Binary input, support TTL, RS-232/422/485 or passive switch button |
Signal output | Arbitrary alarm, Binary output, support TTL, RS-232/422/485 or relay output |
Connector | Standard terminal lead |
Environmental | |
Work voltage | Chassis supply electricity(170V~240V AC auto-adaptation) |
Work temperature | -35º C~+70 º C |
Humidity | 0~95%non-condensing |
Model OM600: | OM600 series represent Video Optical Transmitter/Receiver 610 represents Desk-Top one; 620 represents in card |
V: | Video Signals. The front Arabic numeral represents thde number of signal channel, ↑ is forward, ↓ is reverse, ↑ ↓ means bidirectional. |
A: | Audio Signals. The front Arabic number represents the number of signal channel. |
D: | Data signals. The front Arabic number represents the number of signal channel. |
K: | Binary input/Output Signals. The front Arabic number represents the number of signal channel. |
E: | Ethernet signals. The front Arabic number represents the number of signal channel. |
C: | Telephone signals |
S: | single mode 1310nm |
U: | single mode 1550nm |
M: | Multimode 1310nm |
W: | Wavelength Division Multiples(WDM) 1310NM/1550NM |
T/R: | T is transmitter, R is receiver |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() | |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |