NINGBO ABLE RUBBER AND AUTO PARTS CO.,LTD

Detailed Product Description

Tire Repair Tools
Item: TRT09-1F
T-handle reamer
Heavy-duty steel
Standand: TRA,E.T.T.T.O

 TRT09-1F tire repair tools
 
Specification:

Item: TRT09-1F
 
T-handle reamer

Heavy-duty steel

Standand: TRA,E.T.T.T.O
 
Description:

tire repair tools is specialist in the mending ,to use with the tire seal , fast and convenient for using .This product is metal (iron ) products,with safety ,high efficinecy,quickly and so on the characteristic ,to use it combine with our tire seal can remove the driver's problem during the driving .
 
Function and User Guide:
 
1. The first step is to locate the offending foreign object in your tire.

2. Remove the Object

3. Put 2-3 drops of the rubber cement on the tip of the reamer and insert the reamer into the puncture. Work the reamer in and out while twisting to clean and prep the puncture and apply the cement. This process will also enlarge the hole to that the plug will fit through; because of this the first couple of insertions can be difficult. Repeat this process 2-3 times to make sure the puncture is clean and that there is enough cement in the wound. 
 
4. Take each end of the repair string(about 70mm long), this is the plug, and roll the center of the string into the needle eye. Apply 2-3 drops of rubber cement to the end of the needle and
Push the needle and repair string into the puncture (this can be tricky with smaller punctures) until only about a quarter-inch of the strip is sticking out of the tire's surface.
 
5. Make a 1/4 turn with the  handle and pull the needle probe out of the tire. The patch should remain in the tire when you remove the probe.Trim the repair strip that is sticking out of the tire down to about 1/8 of an inch.
 

6.Use an air compressor to replace any air that may have leaked out of the tire. Your tire should be re-inflated and ready to get back onto the road.