patient monitor

Multi-Parameter Patient Monitor,
Home Use Fetal Doppler
Fetal doppler,
Pulse Oximeter,
electronics colposcope,
 
FEATURES:
1. Portable ,streamline handle design
2. Unique remote control make the operation easy and convient
3. Parameter:ECG HR NIBP RESP SPO2 DUAL-TEMP
4. 15'' TFT (diagonal)display,1024X768 resolution
5. 96-hour tabular and graphic trends & date storage
6. Rolling and refreshing waveform display(each channel)
7. Full-lead ECG ,7 channels display simultaneously
8. 13 kinds of arrhythmia & 3 channels S-T segment detection auto-analysis
9. Maximum 96 hours graphic and tabular trends of all parameters
10. 50 vpc evens ,300 groups NIBP data;20 minutes ECG waveform recall
11. Against electrosurgical interference and defibrillation
12. 2 languages (Chinese English)interface
13. Large-font display mode
14. Can setup a monitor-network with center service
 
SPECIFICATION:
Parameter :ECG(HR) RESP,NIBP, SPO2(Pulse Rate),TEMP
Patient range : Neonate, pediatric ,adult patients
Display:
15'color TFT (diagonal), 1024X768 resolution;
Rolling and refreshing waveform display;
Multi display selectable;
Standard display;
Trend coexist display;
Freeze display ;
Alarm limit display ;
7 lead and ECG simultaneous display;
OxyCRG dynamic view display.
Trace: Maximum 7 waveforms
Sweep speed:6.25mm/s;12.5mm/s,25mm/s,50mm/s
Indicator:
Alarm indicator light ;
Power indicator light ;
Battery indicator light ;
Working indicator light ;
QRS beep and alarm sound.
Interface:
Parameter cable interface;
AC power input socket ;
Network interface ;
External VGA interface for connection of and Alternate display;
Aux Output Display( analog/defib-synch/nurse call).
Battery:
Rechargeable lead Acid Battery
Maximum 12hours for charging
2 hours for continuous working
Trend time : 196 hours
Alarm :
User-adjustable High and Low limits 3 level audible and visual alarm
Networking :Connected to central monitoring system
Recorder:
Built-in, thermal array;
Waveform :2 channels;
Record mode : manual ,on alarm ,time defined, etc.
Paper width :50mm
Print speed:25mm/s,50mm/s
Demensions
Size : 358mm(w)X327mm(H)X180mm(D)
standard configuration :5.5Kg
Environment
AC Power Requirements: 100-240V 50/60Hz ,100VA
Temperature:0-40 degrees
Humidity:15-95%(non-condensing)
Working
Temperature:0-40 degrees
Humidity:15-95%(non-condensing)
Barometric pressure:86-106kPa
Transport
Temperature:-20 to 55 degrees
Relative humidity:=95%(non-condensing)
Barometric pressure:50-106kPa
 
ACCESSORIES
Standard
1 main unit
1 5 lead ECG cable
1 SPO2 cable
1 NIBP cuff
1 Temp probe
1 ground wire
1 manual operation
Optional :
Recorder, 2 IBP, ETCO2