1. Oak Board, Oak Panel, Finger jointed Oak panel
2. Sizes: 3000/4000x610/650/720/900/1220mm
3. Thickness: 18, 20, 25, 27, 28, 30, 36, 38, 40, 45mm
Grade: AB or CC/CD
Grade: face grade A, underside grade B
A: no defects, no knots, no sap, good bright, even colour, very a little discoloration
B: discoloration and sap allowed, dead knots not exceeding 1mm, live knots allows, good bright colour
C: a little discoloration, limitless sap, a few knots, dead knot not exceeding 1cm, a little decayed
D: limitless discoloration, limitless sap, knots below 30mm allowed.
1. Species: Oak, Ash, Walnut, Maple, Beach, Pine.
2. Thickness: -0mm+0.2mm, Width: -0mm+5mm, Length: -0mm+10mm. Lamella/Stave Width: 30-60mm . Random length of Stave:150-700mm.
3. Size-cut: worktop must be cut precisely in 90 angle.
4. Moisture Rate: 8%-12%. Sanding: 240 grit (face); 180 grit(back).
5. Glue: Finnish Dynea & Japanese Koyo(according to DIN EN 204) without open gluelines. ,
6. Finger Joints: Quality of joints between lamellae will totally exclude breakout, gaps, holes and excess glue on Top face. Ends well trimmed; finger joint hiding at side.
7. Production Capacity: 300m3 per month.
8. PACKING: a strong shrink wrap, corners reinforced, very safe packaging (plastic bands), fiberboard covering, strong wood pallets.