Lab Mill
Operating principle:
Jet mill, with cyclone separator and radial fan, consists of a crushing system. Compressed air after being dried is injected into crushing cavity quickly by the injection of valves. At connection points of many high-pressure air currents, feed materials are collided, rubbed and sheared repeatedly to powders. The crushed materials go into classifying cavity with uprising air flow, under the condition of lashing forces of radial fan. Under strong centrifugal forces of high-speed rotating turbo wheels, coarse and fine materials are separated. Fine materials in line with size requirements go into cyclone separator or dedusting filter through classifying wheels, while coarse materials fall down to crushing cavity to be crushed continuously.
Performances and features
l Suitable for materials with Mohs hardness<9, especially, super-hard, super-pure and high extravalue materials.
l Horizontal classifying installation. Accurate top point cutting. Particle size: D97:8-150um, adjustable, good shape and narrow size distribution.
l Low temperature, no medium rushing, especially for heat-sensitive, low-melting point, sugar-containing and volatilized materials.
l Feed materials impact by themselves, different from others which use hammer and razor blades. Wear-resistance and high pure.
l Easily to be dismantled, smooth inside wall and no dead angle.
MQW03
MQW06
MQW10
MQW20
MQW40
MQW60
MQW120
MQW160
MQW240
Feed size
mm
<3
<3
<3
<3
<3
<3
<3
<3
<3
product size
d97:um
245
245
245
545
545
545
545
545
545
produce ability
kg/h
230
30200
50500
1001000
2002500
5003500
8007500
100010000
150015000
air consumption
m3/min
3
6
10
20
40
60
120
160
240
air pressure
Mpa
0.70.85
0.70.85
0.70.85
0.70.85
0.70.85
0.70.85
0.70.85
0.70.85
0.70.85
installed power
kw
21.8
42.5
85
147
282
415
800
1100
1600
Deutsch | Español | Français | Italiano | Português | 日本の | 한국어 | العربية | български | hrvatski | česky | |
Dansk | Nederlands | suomi | Ελληνικά | हिन्दी | norsk | Polski | Română | русский | Svenska | 中文 |