Application Instructions:

1.    Surface Preparation:

The surface should be vertical, flat, smooth and free of dust, grease and other contaminants.

The new cement mortar surface should be maintained at least 14 days before the application of the adhesive.

2.      Application Method:

Mix the powder with water at the ratio of 25:6-6.5, and then use electrical blender to stir evenly.

Keep the mixture for 5 to 10 minutes, and then stir it again to achieve the best result.

Finally apply the adhesive on the surface with the notched scraper, and then put the ceramic tile on the surface and press.

Mixing Ratio (powder: water):  25: (6-6.5)

Application Tool: electrical blender, notched scraper(3x3mm, 4x4mm, 6x6mm, 8x8mm, 10x10mm), horizontal ruler etc.

Kindly Reminds:

1.      Application temperature: 5 C-40 C.

2.      Control the mixing ratio of powder and water strictly to avoid too thick or too thin and damage its performance.

3.      Don't add water into the dry and hard adhesive mixture and use it again.

4.      If the surface and tile's backside is not even enough, apply some adhesive on the tile's backside to avoid hollowing.

5.      Store in a cool, dry and well-ventilated place.