Characteristics of the equipment:
HL series novel & efficient single-screw extruder is developed by our company adopting German latest advanced technology. Screw optimizes composing separate type screw and mixing parts. Barrel optimizes composing groove barrel and lengthened feeding segment. There is advantage as following by using separate type screw and groove barrel together:
It's optimized during material melting process. Thus get more extrusion throughput.
It is realized extruding melt material in low temperature.
Cutting function is caused through separate clearance and it makes material equal well.
It's controlled during melt plasticization process. Therefore only granule smaller than separate clearance can enter melt channel.
Wide manufacture range for different materials. It's suitable for all kind of polyolefin materials and specially for material for HDPE, PP, ABS pipe.
Main technical parameters usde for various pipe extruding Model HL1-45-33B HL1-60-33B HL1-75-33B HL1-90-33B HL1-120-33B HL1-150-33B Power of drive 37 75 110 160 280 400 Screw diameter 45 60 75 90 120 150 L/D ratio 33 33 33 33 33 33 Torsional moment 1600 3600 6300 11200 25000 45000 Capacity 150 300 450 600 1000 1300 Dimentions 2200x1440x1950 3000x1440x2000 3660x1550x2200 4230x1675x2200 5370x1860x2400 6630x1920x2450
(kw)
(mm)
of screw
(Nm)
HDPE/MDPE,
PELLET PP(kg/h)
PP,(PELLE)
110
200
320
450
750
900