Gaskets 
Spiral Wound Gaskets Metal Jacketed Gaskets Reinforced Graphite Gasket Ring Joint Gaskets PTFE Envelope Gasket Serrated Gasket Rubber Gasket Other gasket Gasket Sheets Expanded Graphite Sheets Non-Asbestos Sheet PTFE Sheet Rubber Sheet Asbestos-Rubber Sheet Mica sheet Compression Packings Aramid Packing Carbon Fiber Packing Graphite Packing PTFE Packing Graphited PTFE Packing Synthetic Fiber Packing Asbestos Packing Sealing Raw Materials Gasket Materials Packing Materials Insulation Products Ceramic Fiber Glass Fiber Dust Free Asbestos Dusted Asbestos Carbon Fiber Sealing Machines Sealing Tools Machines for SWG Machines for cutting gasket Machines for braided packing Other Sealing Machine lines 
;){kind=small}
AIFLON 1000 Asbestos Packing
Square braided from high quality asbestos yarns, it has more flexible structure. The grade of max.temperature is based on your requirement,we'll offer 350℃,in general.
AIFLON 1002 Asbestos round braided packing
Same as PA1000,just round braided,suitable for the places where the round type is required.
AIFLON 1000G Graphited Asbestos packing with oil
Braided from high quality asbestos impregnated with graphite and oil,it has a good elasticity and very good sliding properties.
AIFLON 1000IGE Nickel Reinforced Asbestos packing treated with graphite & rubber
Good quality asbestos packing treated with rubber and graphite inside and outside coated, each yarn reinforced by a thin nickel wire, other reinforced materials e.g. stainless steel,brass etc. are also available.
AIFLON 1000IGR-2 Nickel Reinforced Asbestos packing treated with graphite & rubber
Same as AIFLON 1000IGR, but only surface graphite coated, it's economical.
AIFLON 1000P Asbestos Packing with PTFE impregnation
Long fiber white asbestos impregnated with PTFE. It has anticorrosive and long service properties.
AIFLON 1000PO Asbestos Packing with PTFE & oil impregnation
Same as AIFLON 1000P, but treated with a special lubricant. It is soft and can be used for stainless steel or chromed shafts in the presence of high peripheral speeds without etching them.
Application
| 1000 1002 |
Static sealing filler. |
| 1000G | Dyanmic sealing To be used as a stuffing box in pumps(especially boiler feed pumps) and in valves.Resistant to alkaline solutions,inert fluids.(oils etc.),water, steam, gases, hot water and salt solutions. |
| 1000IGR 1000IGR-2 |
Static Can be used for handholes, manholes, lids as static seal. Is suitable even under under rough operating conditions like in steam hammers, reactors,steam valves etc. Also used for valves and slow running equipment under high temperature and pressure. |
| 1000P 1000PO |
Static and dynamic sealing Especially suitable for a wide range of application for large rotary pumps in the medium pressure range. |
Service Limits
| style | 1000/2 | 1000G | 1000IGR | 1000IGR-2 | 1000P | 1000PO |
| T | 350℃ | 450℃ | 550℃ | 550℃ | 260℃ | 260℃ |
| P | 80bar | 200bar | 150bar | 100bar | 100bar | |
| V | 10m/s | 10m/s | 12m/s | 10m/s | ||
| PH | 4-10 | 4-10 | 2-13 | 2-13 | 2-13 | 2-13 |
| D(g/cm3) | 1.25 | 1.4 | 1.4 | 1.35 | 1.4 | 1.6 |
Normal Dimensions
| Size(mm) | 4 | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 25 |
| m/kg | 40 | 27 | 17 | 10 | 7.5 | 4.5 | 3.5 | 2.8 | 2.2 | 1.8 | 1.4 | 1.1 |
| Kg/roll | 5 | 10 | ||||||||||
| This sheet is for PA 1000P、1000G、1000IGR； 1000PO:appr.+15% | ||||||||||||
 Deutsch
|
 Español |
 Français |
 Italiano |
 Português |
 日本の |
 한국어 |
 العربية |
 български |
 hrvatski |
 česky | |
 Dansk |
 Nederlands |
 suomi |
 Ελληνικά |
 हिन्दी |
 norsk |
 Polski |
 Română |
 русский |
 Svenska |
 中文 |
