The structure of fish bone remover machine principle and characteristics of the machine:
1.the driving way : the motor through the belt --- --- with roller gear, respectively, the power transfer to the polyurethane nylon belt and stainless steel tube, and make it operation.
2.the process of fish bone
remover:
The fish to be processed manually
remove the head and remove the belly first, the internal organs;
for the big fish, you need to split the fish in half and rinse
clean. Then two pieces of fish are taken into the hopper (fish
subdivision surface towards the tube,the back close to the nylon
belt), fish in the nylon belt to take the lead into the extrusion
cylinder and nylon belt area.
3.Separated the fish, taken in the nylon belt and squeezed between
the tube under pressure, fish have been squeezed by taking the tube
into the hole on the separation barrel, and then entered manually
and then crushed to scrape the barrel of fish undertake the
slot.
4.The skin and fish bone were installed in the machine's blade
scraped the barrel to fall from the nylon belt, nylon belt to be
collected into the bottom of the slot machine.
5.Nylon belt and take the pressure between the size of the cylinder
is located on the head by a nylon belt tensioning device to
adjust.
Adjust the size of the volume is based on the different species
vary. Practice in the production of manual adjustment.
parameters
Dimension
800*550*800mm
package
Wooden package
Voltage
220/380V
Power
1.5kw
capacity
180kg
Weight
170kg