PTC Over current Protection :

Application Principle
Ceramic PTC thermistors are used instead of conventional fuses to protect loads such as motors, transformers, etc. or electronic circuits against overcurrent. They not only respond to inadmissibly high currents but also if a preset temperature limit is exceeded. Thermistor fuses limit the power dissipation of the overall circuit by increasing their resistance and thus reducing the current to a harmless residual value. In contrast to conventional fuses, they do not have to be replaced after elimination of the fault but resume their protective function immediately after a short cooling-down time.
As opposed to PTC thermistors made of plastic materials, ceramic PTC thermistors always return to their initial resistance value, even after frequent heating/cooling cycles.

Technical Data

Type

Technical Parameters

Dimension (mm)

Rating Resistance
At 25