Detailed Product Description

Specification
1.3M CMOS sensor
Video recording: 640 x 480 (30FPS)
380mAH Lithium battery (1.8 hours working around)
TF card slot (support up to 8GB)
64MB internal memory
TV out
Web camera

Accessories:
1. Lens
2. Camera grip
3. Screw
4. Nut
5. Handlebar grip
6. Helmet grip
7. O-ring
8. USB cable
9. AV cable
10. Short Velcro strap
11. Long Velcro strap
12. Silicon rubber head strap
13. Bolt

Camera Mounting Description
The camera can be mounted in a number of ways
using the straps provided. Please follow the
methods of mounting as suggested below:

Fixing the position of the camera
a) Turn it anti-clockwise to screw the camera
tight to fix it into position.
b) Turn it clockwise to unscrew the camera.

Mounting the camera onto the helmet using the silicon rubber strap
1+2 Thread the silicon rubber strap through the helmet grip.
3. Mount the helmet grip to the helmet using the silicon rubber strap.
4.Slide the camera into the helmet grip. Turn it anti-clockwise
5. Adjust the angle of the camera making sure it's tight. To screw tight.
6. To avoid damaging the camera, the mount lock at the base must
be loosened before twisting the camera.

Mounting the camera using the velcro strap:
1+2.Place the helmet grip on the helmet, and thread the velcro strap
through the helmet grip.
3. Secure the velcro strap by fastening it through
the helmet vents.
4. Slide the camera into the helmet grip, and adjust
the angle of the camera making sure it's tight.

Mounting the camera using the handlebar grip:
1. Place the handlebar grip on the handlebar.
2. Add the screw and nut to hold the handlebar grip securely.
3. Slide the camera into the handlebar grip and make sure the handlebar
grip is locked with the camera.
4. Adjust the angle of the camera.

Power on/off your action camera
When the power key was pulled to "ON" position, Press POWER button
for 2 to 3 seconds to start your action camera, you can hear a sound DIDI,
and the green light is on.
Press POWER button for 2 to 3 seconds to turn off your action camera
when camera is on, you can hear a sound DIDI and the green light is off.

Take a Video
Press POWER button to start video recording (you can hear a sound DI,
and the green light starts twinkling) when camera is powered on; press
POWER button again to stop recording (you can hear a sound DI, the
green light stops twinkling and goes OFF)
The camera is supplied with a 64MB internal memory. After screwing of
the cap at the backside of the camera, a TF card slot is visible
(Supports up to 8GB).
Place an optional TF card in the slot to lengthen your recordings.
Remarks:In VGA mode,The resolution of camera is 640