Detailed Product Description

This is the new-designed 2th generation Waterproof Sport Camcoder which is more clear than the 1th generation in the color and clearity.At the same time It can display the time of your taking DV with 50 Frames per second.If you want more exact manual Pls leave your message Then We send you the exact manual for your careful examination.
if for actual -taking DV Clip Pls send us the mail
after we confirm the mail We will send the attachment clip back.

Obvious differences from the 1th generation Waterproof Sport Camcoder.
1.more abundant colors and high resolution.
2.Displaying the "time" in taking DV.
3.50FPS/ 640*480 Pixels in taking DV.

Technical Specification
* Sensor 1.3Mega pixels CMOS sensor
* Lens All glass lens
* Built-in memory 64MB
* SD Memory Card slot support up to 8G(Not included)
If you need the SD Kingston Original Card pls cosult ours online.
We will revise the price with the Camcoder+ SD Card price for your
referrences.
* Movie storage:
VGA 640 x 480 pixels (50 FPS)
QVGA 320 x 240 pixels (50 FPS)
* Movie format AVI
* USB
* Battery 2 x AAalkaline batteries
Accessories:
1. Lens
2. Camera grip
3. Screw
4. Nut
5. Handlebar grip
6. Helmet grip
7. O-ring
8. USB cable
9. AV cable
10. Short Velcro strap
11. Long Velcro strap
12. Rubber head strap
13. Bolt

Trouble Shooting:

There is no display
-Are the batteries properly installed ?
-Do the batterie need replacing?
After the Action Cam is connected to my PC,It cannot find the new drive in the "my computer"folder
-Make sure each end of the Actions Cam USB Cable is properly and firmly connected.
-Make sure your USB Port is working properly.Try connectiong another USB Device into the port.If the other device doesn't work,the USB port may have a malfunction.
I can't capture the video footage
-Make sure there is enough space on the internal memroy of Action Cam or the SD Card;the display will tell you how much time left for video recording.
-Make sure the SD Card is not locked if you have inserted in the SD card.It can't take video footage in the SD card is locked.
The remaining time is not accurate
-The remaining time is not accurate,It is an estimate.
-The remaining time depends not only on the time recorded,but on the color desnsity of the video footage.Under conditions with high contrast,such as outdoors,the actual time available will be less than under low-contrast conditions,such as indoors.
I can't play the video footage on my television.
-Make sure each end of the AV cable is properly and firmly connected to Action Cam and your televison.
-Make sure the Action Cam is turned on.
-Some captured video footage cannot be found when SD card is inserted .the video footage may be stored on the internal memory.Connect the Actions Cam to your PC without an SD card,and it will show the files in the interanl memory.
Tips:
The camera is high speed video camera,to help you to get high quality video image,pls notice:
High speed branded SD/MMC card is recommneded.
1.Inster SD cafd
2.Turn on the Camera
3.Press sutter button for about 5 second,LCD display"FOA",wait a moment it returns to video mode.the card is formatted successfully.