Detailed Product Description

Palisade Fences and Gates

Jinbiao offers quality steel palisade fence with a high level of protection at a reasonable cost. Construction A standard panel is constructed from hot and cold rolled steel sections supplied for assembly on site. Panels consist of 17 vertical pales manufactured in "D" or "W" profile with a choice of tops. The pales are fixed to rolled steel angle horizontals which are supported by 102 x 44 joist posts.   Fencing is supplied in 2.75m wide standard panels for easy assembly on site. Special panels and posts to step or rake can be supplied if required. Non standard posts for cranking over walls, or base plated for fixing to concrete are also available. Our design department can assist clients with specific fencing problems or difficult site conditions and will offer solutions utilizing CAD based facilities available to them.   Pale Heads From the fierce Triple pointed top to the Round head, each top complements a particular requirement to meet a perceived level of security risk. A choice of "D" or "W" section is offered with a variety of heads and thicknesses chosen by the risk assessment for a particular site.   A range of standard heights and specifications are available together with a range of complementary gates.   Stock Fencing Available STANDARD HEIGHT PALE SECTION HEAD PROFILE 1.2M 3.0mm "D" ROUNDED & NOTCHED 1.5M 3.0mm "D" ROUNDED & NOTCHED 1.8M 3.0mm "D" ROUNDED & NOTCHED 1.8M 3.0mm "D" TRIPLE POINTED 1.8M 2.0mm "W" TRIPLE POINTED 2.0M 3.0mm "D" ROUNDED & NOTCHED 2.0M 3.0mm "D" TRIPLE POINTED 2.0M 2.0mm "W" TRIPLE POINTED 2.1M 3.0mm "D" TRIPLE POINTED 2.1M 2.0mm "W" TRIPLE POINTED 2.4M 3.0mm "D" TRIPLE POINTED 2.4M 3.0mm "D" ROUNDED & NOTCHED 2.4M 2.0mm "W" TRIPLE POINTED 2.4M 2.5mm "W" TRIPLE POINTED 3.0M 3.0mm "D" TRIPLE POINTED Stock Gates Available GATE HEIGHT GATE WIDTH 1.8M SINGLE 1.0M 1.8M DOUBLE 3.0M 1.8M DOUBLE 4.0M 1.8M DOUBLE 5.0M 1.8M DOUBLE 6.0M 2.4M SINGLE 1.0M 2.4M DOUBLE 3.0M 2.4M DOUBLE 4.0M 2.4M DOUBLE 5.0M 2.4M DOUBLE 6.0M 2.4M DOUBLE 7.0M 2.4M DOUBLE 8.0M     Please ask our Sales department, who will be pleased to give availability on a specific requirement.     Swing Gates    Palisade gates are available to compliment the chosen fencing system and can be manufactured to any width specified. The design has been carefully detailed to provide a deterrent to climbing and forcible attack to a similar level as the fencing system. There are also a wide range of widths and heights available for immediate despatch from our stock range. Designed for strength and durability, palisade gates can also be  supplied in the following formats. Single leaf emergency exit gates. Single Leaf swing gates up to 7.00m opening. Double Leaf swing gates up to 14.00m opening. Contiguous gates with double and single leaves hinged from a common post. Automated swing gates Sliding Gates Singles up to 10.00m opening. Doubles up to 20.00m opening Automated sliding gates Long System Life Our fencing systems are built to last and a minimum maintenance requirement is inherent in all our product designs. Fencing is hot dip galvanised to BS EN ISO 1461 ensuring complete protection with a long life span. The visual aspect of the fencing can be further enhanced by the specification of architectural grade Polyester Powder coating applied to meet the requirements of British Standard 1722 part 16 or, when specified, British Standard 6497.   With a choice of over 100 colors to choose from, a pleasing appearance with additional protection is ensured. Safety We do not recommend the use of pointed paling sections at heights less than 1.80m due to safety considerations. In these cases we can offer a round top alternative.