Upgrade Software Only for YiHi SX330_IPV2S_70W_20141024-1329_V1.7

Dear Friends,

1. This software Only for the chip YiHi SX330 V2S. Device who use this chip named IPV2S 

2. Please download the YiHi SXi Driver below. SX330 and SX350 use the same driver.

3. If you do not know how to upgrade, please kindly check our video on Youtobe http://youtu.be/XNmelCIDWXU

4. It is a easy job for you to operate the upgrade. In case you have problem to upgrade your IPV2S, please read below Upgrade valuable book.

1. please select other computers with Win7/Win8 system

2. Exist Antivirus program from your computer.

3. Please make sure the file you downloaded from our website is completed, not a broken file

4. To connect the chip to the computer, we have some ways as below:

   1) disconnect the battery, then connect the chip directly to the computer.
   2) connect the battery, then connect the chip directly to the computer.
   3) connect the battery, turn        on the chips, enter the menu, choose "link", tilt right for 5 seconds, until it turns black.
 
Please try these 3 different ways, especially the third one, to see if it can be connected to the computer, thanks. 

5. Please be remind that some USB cable can only charging and there is no wires for DATA inside the USB cable.

6. If pop up error message, or there is any other problems please contact with our Customer Service Cservice@yihiecigar.com

7. After upgrading successfully, please remember Reset your chip. Disconnect the battery or use "Link" to reset the chip (1. Press the fire button 

down&keep 5 seconds to read the version information. 2. Press 5 times quickly to start up the chip. 3. Go to "Link" and tilt right&keep 5 seconds 

untill the screen turn black. If unplug the USB, chip will start up automatically.)

Please be remind that the logo of this software is IPV2S.

B.rgds,

Custome Service Dept.