Detailed Product Description

By the upgrade of lifting arm technology optimization, Xuzhou Heavy Machinery establishes the leading position in the key technologies of oblong section lifting arm and flexible lifting arm system automatically controlled by single cylinder mutually locked......

Classificatory	Item		Unit	Parameter
Outline dimension	Overall length		mm	11810
	Overall width		mm	≤2500
	Overall height		mm	3170
	Wheel base	Axle 1, Axle 2	mm	4025
		Axle 2, Axle 3	mm	1350
	Track	Front wheel	mm	2079
		Rear wheel	mm	1834
Mass	Total mass in travel state		kg	21540
	Axle load	Axle 1	kg	6300
		Axle 2	kg	15100
Travel performance	Travel speed	Max. travel speed	km/h	≥69
		Min. stable travel speed	km/h	≤2.8
	Turning diameter	Min. turning diameter	m	≤21
		Min. turning diameter at boom tip	m	≤24
	Min. ground clearance		mm	≥260
	Approach angle		(°)	≥16
	Departure angle		(°)	≥14
	Braking distance (at 30km/h with full load)		m	10
	Max. grade-ability		％	≥32
	Fuel consumption for 100km		L	30

Main Technical Data for Lifting Operation

Classificatory	Item				Unit	Parameter
Lifting performance	Max. total rated lifting capacity				t	16
	Min. rated working radius				m	3
	Turning radius at turntable tail				m	≤2.765
	Max. load moment		Base boom		kN.m	711.48
			Fully extended boom		kN.m	449.8
			Fully extended boom + Jib		kN.m	327.7
	Outrigger span		Longitudinal		m	4.68
			Lateral		m	5.4
	Lifting height		Base boom		m	≥10.17
			Fully extended boom		m	≥24.7
			Fully extended boom + Jib		m	≥32.3
	Boom length		Base boom		m	10
			Fully extended boom		m	24.2
			Fully extended boom + Jib		m	32.35
Working speed	Boom raising time				s	≤50
	Boom full extension time				s	≤73
	Max. swing speed				r/min	≥2.1
	Hoist speed	Main winch		Full load	m/min	≤82
				No load	m/min	≤100
		Aux. winch		Full load	m/min	≤72
				No load	m/min	≤100
Noise limit	Crane exterior noise				dB (A)	≤118
	At seated position				dB (A)	≤90