Detailed Product Description

By the upgrade of lifting arm technology optimization, Xuzhou Heavy Machinery establishes the leading position in the key technologies of oblong section lifting arm and flexible lifting arm system automatically controlled by single cylinder mutually locked......

Classificatory	Item		Unit	Parameter
Engine	Model			D6114
Outline dimension	Overall length		mm	11990
	Overall width		mm	2500
	Overall height		mm	3350
	Wheel base	Axle 1, Axle 2	mm	4025
		Axle 2, Axle 3	mm	1350
Mass	Total mass in travel state		kg	22900
	Axle load	Axle 1	kg	5240
		Axle 2	kg	17660
Travel performance	Travel speed	Max. travel speed	km/h	70
		Min. stable travel speed	km/h	4
	Turning diameter	Min. turning diameter	m	20
		Min. turning diameter at boom tip	m	23
	Min. ground clearance		mm	270
	Approach angle		(°)	21
	Departure angle		(°)	10
	Braking distance (at 30km/h with full load)		m	9.5
	Max. grade-ability		％	24
	Fuel consumption for 100km		L	35
Power	Engine rated output		kW/(r/min)	158/2200
	Engine rated torque		N.m/ (r/min)	790/1400
	Engine rated speed		r/min	2200

Main Technical Data for Lifting Operation

Classificatory	Item				Unit	Parameter
Lifting performance	Max. total rated lifting capacity				t	16
	Min. rated working radius				m	3
	Turning radius at turntable tail				m	≤3.12
	Max. load moment	Base boom			kN.m	711
		Fully extended boom			kN.m	449
		Fully extended boom + Jib			kN.m	186
	Outrigger span	Longitudinal			m	4.6
		Lateral			m	5.4
	Lifting height	Base boom			m	≥9.9
		Fully extended boom			m	≥23.6
		Fully extended boom + Jib			m	≥30.8
Working speed	Boom raising time				s	≤60
	Boom full extension time				s	≤75
	Max. swing speed				r/min	≥2.5
	Hoist speed (single line)		Main winch	Full load	m/min	≥54
				No load	m/min	≥100
			Aux. winch	Full load	m/min	≥54
				No load	m/min	≥100
Noise limit	Crane exterior noise				dB (A)	≤118
	At seated position				dB (A)	≤90