Detailed Product Description

iPad Battery Pack,IPAD battery bag,ipad backup battery case

This product is suitable for iPad. In addition to being a super battery life of portable back-up battery pack, can also be used as the iPad protective cover, bring to your iPad strong momentum and excellent console protection.
Built-in large capacity rechargeable lithium battery (8000mAh), The console for the iPad provides the most about 5 hours of battery life use of time.
IPad original AC adapter with the battery pack charging to the saturation takes about 4 hours.
With 4 LED battery indicator and a battery test switch, real-time check the battery pack power, use more convenient.
With 1pc Big 4pin turn the small 5pin USB adapters.
With 2pcs rubber mats, in the use of iPad2 console, the need to install the product inside of the rubber pad to ensure the assembly of stable, see instructions in the assembly location of the schematic.

Electrical parameters:
1. Input voltage: 5V;
2. Input current: ≤ 1.5A;
3. Quiescent current: <100μA;
4. Output voltage: 5V;
5. Output current: ≤1A
Battery indicator:
Press the battery test switch, power on, LED light indicates that there is 5V output voltage output. Then press the test switch ≥ 3 seconds, the power is off.
Turn on the power, if no external load, 3 minutes after the battery pack will automatically enter standby mode.
Press the battery test switch, such as the battery pack charge more than 90%, while the four LED light will light up; such as the battery pack power is greater than 70% and less than 90%, the first, second and third LED lights also light cases; If the battery pack power greater than 50% and less than 70%, while the first and second LED lights also light up; when the battery pack power is greater than 30% and less than 50%, the first LED lights ; When the battery pack capacity is less than 30%, while the four LED lights flash, prompting the user needs to be charged.

User Manual:

1.  in the use of iPad2     console, the first assembly to complete the rubber pad as shown on right  (iPad1 console can omit this step):

2.Put the iPad console to the left from battery pack into the battery pack until the battery pack snaps right to withhold the console, as shown:

3.iPad console will push down gently, then need to pay attention to the charging port on the console align the charging interface on the battery pack, as shown

4.Let the iPad console fully access until the battery pack on the charging interface can be, as shown

1. As shown in Figure, place the iPad console into the battery pack, and then charge the battery pack on the switch to ON, the battery pack began to charge the console, iPad charging icon will prompt the appropriate . After fully charged, pull the charging switch to OFF position, then take out iPad from the battery pack.
2. supporting the battery pack through the USB converter cable connected to the iPad original AC adapter, then connect to AC power adapters, you can recharge the battery pack. Charging for the water four LED display, charge saturation, the four LED turn lit display. Charging process of charging the switch to any position shall not affect the charging process.
3. When the battery pack to charge the console for the iPad, they can be connected to USB converter cable iPad original AC adapter, Priority will be given at this time for charging the battery pack.
4. The iPad host into the battery pack, and through supporting the USB converter cable to the PC, you can be data transfer between iPad and PC.

Attentions:
1. IPad through the battery pack will access the PC, only for iPad and PC data transfer, can not charge for iPad.
 2. Charging, the battery pack will begin to heat, this is normal, for the prevention of overheating, ventilation and shade in the battery pack charged.
 3. Please do not use chemical solvents to clean this product.
 4. Please do not attempt to disassemble, throwing, smashing, or cut with a sharp object, designated battery pack.
 5. Keep the battery pack away from heat, fire place, and avoid direct sunlight.
 6. Please do not place the battery pack stored in damp or into the water.