This glove liner is a kind of practical product with warm-keeping and heating functions,With a advantage of low voltage and safety,it can be used widely in cold areas different people and bring care to your hand ,This item applies re-chargeable polymer battery and therefore can be used conveniently.Please read the following instruction carefully before using it,

 

I.System composition

1.Two units of polymer batteries

2.A CE approved charger with Y-shape output power cord

3.A pair of heated glove liners

 

II. Technical data

1.Charger inputvoltage:AC-100-240V,50/60HZ

2.Charger output voltage:DC 4.2V

3.Charger output current:1.0-1.2A

4.Polymer battery voltage:DC 3.7V/3400mAh

5.Output power:6W(MAX)

 

III.Battery charge

1.The Y-shape charger can charge 1or 2polymer battery at the same time.

2.When the polymer battery is being charged,theLED on the battery will shine red,When the battery is charged full.it will turn green,(Each battery can be charged for 300-500 tims)

3.Before using this item,please charge the battery full.It will take you 4-5hours to charge each battery full

 

IIII.Operation Procedure

1.put on the gloves and insert the plug in the gloves liners into DC socket on the polymer battery.

2.Press the:ON/OFF"key on the battery to start heating ,The :red"indicating light will shine that shows the power output is high.

3.Press the :ON/OFF"key again ,and the LED light will shine red that means the power output is low now.

4.Press the :ON/OFF"key again,the LED  light will be off to show the output is stopped.The working time and corresponding temperature is as below(with an environmental temperature of 15°c)