Detailed Product Description

Name:SP-09 Iron aggregate concrete surface hardener
Category:Floor Coating
Detail:

SP-09 is a premixed, ready to use powder, designed for application as a dry shake over a freshly floated concrete floor or floor screed to obtain a highly abrasion resistant, the product contains specially processed iron aggregate admixtures that can be finished to a wide range of surface textures from smooth to no-slip.

Application areas

SP-09 an be applied for treating floor areas subject to heavy traffic and high abrasion where frequent maintenance is not economical feasible and where surface dusting could a problem. Applications include :

Floors of industrial and commercial building where subject to heavy duty traffic.fork lifts, solid wheeled vehicles, etc.

Industrial floors subject to impact, such as fabrication shops and mechanical engineering workshop.

Parking areas and loading platforms.

SP-09 Iron aggregate concrete surface hardener
Product description
SP-09 is a premixed, ready to use powder, designed for application as a dry shake over
a freshly floated concrete floor or floor screed to obtain a highly abrasion resistant
surface. The product contains specially processed iron aggregate admixtures that can
be finished to a wide range of surface textures from smooth to noo-slip.
Application areas
SP-09 an be applied for treating floor areas subject to heavy traffic and high abrasion
where frequent maintenance is not economically feasible and where surface dusting
could a problem. Applications include:
l Floors of industrial and commercial buildings where subject to heavy duty traffic: fork
lifts, solid wheeled vehicles, etc.
l Industrial floors subject to impact, such as fabrication shops and mechanical
engineering workshop.
l Parking areas and loading platforms
Characteristics
l High abrasion and impact resistance .
l Excellent wear resistance .
l Very easy to construct and maintain
Performance data

ITEM INDEX
Anti-slip The same as cement floor
3d 49.2
Pressive strength MPa 7d 65.7
28d 80
Bending strength Mpa 11.5
Tensile strength Mpa 3.9

Application instruction
Substrate preparation
Remove any surface bleed water by slowly dragging a rubber hose over the surface.
Float the area as soon as the concrete can bear the weight of the finisher and a light
trowelling machine equipped with blades without digging into the surface.
Do not use salt water or salt contaminated aggregates for making concrete as they may
affect the topping to obtain maximum performance.
Placing
SP-09 should be applied in two layers by broadcasting by hand. Approximately
two-thirds of the total quantity should be applied in the first broadcast and the balance in
the second.