Detailed Product Description

Features:
-- Supports each converter module media configured and monitored ability:
-- Optional: LFP(LLCF and LLR) function
-- Supports port state enabled/disabled
-- Supports auto-negotiation/forced mode
-- Supports port speed and duplex mode
-- Supports wire speed packet forwarding ability as below:
10Base-T : 14880 pps
100Base-TX: 148800 pps
-- Supports module per port basic counters for traffic raw data monitor of fiber and TP port as below:
-- Supports RMON counters for port traffic quality monitoring function
-- Supports bandwidth rating per port ingress and egress rate limit 100Mbps with 1Mbps granulari
-- Supports max packet length: 1916 bytes
-- Supports 802.3x flow control for full-duplex ports and backpressure for half-duplex ports
-- Supports comprehensive types of fiber with different distances and connections, including SC/ST/Bidi/LC and so on
-- ports one 10/100Base-T Fast Ethernet UTP port and one 100Base-FX Fast Ethernet Fiber port
-- Supports Q-in-Q double tagged frame transparent
-- Supports firmware upgrade by TFTP
-- Supports converter mode (only block Pause frame 01-80-c2-00-00-01 and ■supported L2 protocol)
-- Supports Module Information (S/N, MAC, Model Name)
-- Supports per port basic LEDs for monitorin
-- Supports media type, connector, wavelength and distance information
-- Supports hot-swap and auto reload configuration ability
-- Supports IEEE 802.1p Priority
-- Supports IEEE 802.1q Tag VLAN
-- Supports QoS Classification based on TOS
-- Supports intelligent diagnostic for self detection
-- Supports external loop back capability
-- Supports web-based and text-based management user interface
-- Supports SMTP
-- Supports DHCP client
-- Supports E-mail client (SMTP RFC 821) and Mobile Phone short message (SMS) for sending Traps and Alam message
-- Supports Dying Gasp function
-- RoHS Compliance