Detailed Product Description
In each vacuum tube there is a U pipe with direct flow- through
that is connected to the header pipe inside manifold. this U pipe
is seamed in an aluminum heat transfer fin in the interior of
vacuum tube tht transmits the heat from the interior tube t o the U
pipe. please you reference following:
This demstic solar water with electrical heater solar water
heater is our hot products.
1)light-wiehgt, easy installation and short delivery.
2)Attractive design, standard frame suitable for pitched roof or
flat roof.
3)Can be connected with the exsiting heating device ,
4)Hunanized design, no water directly flowing in the tubes ,
enabling the system still workable in case of occasional tube
breakage.
Heat pipe solar description:
1)Heat pipe solar collector for thermal collection with high
speed start and super heat collecting and eachanging
efficiency.
2the heat pipe material is copper, So it is ok to transferred
to liquid passing through pipes attached to the absorber palte.
3The circulation is closed loop for themal collecting and
enchanging start and superior heat collecting.
4 Modularized colletor arbrination with architetural structure
adoptable to either slope or flat roof structure, adoptable to
either slope or flat roof tructure, almost maintence free
system.
The heat pipe Solar collector.
1Model:JHC.
2Vacuum tube:Borosilicate glass 3.3, Diameter 58mm, and leng
1800.
3heat pipe:Red copper
4Manifold casing:Aluminium alloy.
5 insulation Layer:Rock wool.
6Frame:Aluminium alloy like Manifold casing.
7 heat transfer fin:Unify aluminium sheet.
8 Working pressure:0.6Mpa or 0.7Mpa
.
Pressurized water tank.
1 Out tank shell , there are different according to your
request, Colored/ enamel/ stailness/fluorine carbon steel can be
choice freely.
2inner thank, SUS304-2B stainless steel, thickness about 1.2mm,
it keeps the water clean and drinkable and temperature. automatic
argon-avc welding technics ensures on leakage and long
lifetime.about 30years.
3Insulation layer, hight density polyurethane ,
integrated-foaming with twice slaking treatment constanly.
4Presurized water tank with super hydroulic pressure bearing
makes your hot water using more comfortable.
5Copper coil inside storge thank exchanges, heat from collectors
medium to water very efficiently, one more copper coil installed in
the tank top could beconnected with radiator for house heating it
with other heating devices such as gas boiler to assist solar water
heating in weather.
The solar panel with electrical heater working system.
1 the integrated system consisting of intelligent controller
circulating pump flow meter, relief value,expansion vessel, relief
value, circulating pump.etc
2automatic operation with intelligent controller, when
temperature discrepancy between collecormesium, and water in
storage tank reaches set value, the conteoller shall start the
circulation pump autonatically for heat exchage or start auxiliary
heating element to assist solar water heating when colder water
presents.
other accessories.
1)Electrical heater as on anxilary heating element i case of
the weather raining or snowing days, and the sun hide more than
72hours. So as to ensure a comtinus supply hot water.
2double pipeline pump station.Exterior size:420x280x140mm. Power
supply:110v/220v. Collector temp measuring range:-10-200. tank temp
measuring range:0-100.
Max presure:1mpa,
Max. flow rate:2.5t/h
Components:safe value, wilo pump ,manometer, flow meter ,
controller.
3 Anode magnesium Bar,usually hard water in system so as to
pretect storage tank and copper coil from water seale
effectively.T/p valve stailness bolts and nuts ,anti-aging ,rebber
seal, pipe holder make their life as long as other parts of the
system .
|