Detailed Product Description

The JINYI Solar JNG series of non-pressurized solar water heaters offer excellent value as they have a very low cost per kWh of output. The collectors are also very easy to transport and handle as the tubes can be disconnected from the tank of the system.Using a thermosiphon vacuum tube solar water heater systems is an excellent way to start saving on your domestic hot water heating bills. The tank must be above the collector, so the thermosiphon phenomenon can occur, circulation water from collector to tank.

Specification:

Vacuum tube: 58 x 1800mm, 24tubes

Absorber coating: AL/N/AL

Absorptance: a=0.88-0.92 (AM1.5)

Tank capacity: 190litre

Tank & tube capacity: 240litre

Insulation layer: 55mm

Assistant tank: 8L or 25L, with or without, optional

Solar collector absorber area: 3.01m?

Testing pressure: 0.5bar

Inlet & outlet: 3/4"

Frame: galvanized steel, 1.5mm

Collector angle: 27, 38, 45 degree, optional

Advantages:

1. Can he operated completely automatic if connect with intelligent controller.

2. Simple structure, easy plug-in installation, can be installed both on flat and inclined roof, and can be used with an

auxiliary electric booster as to provide tot water without sunshine.

3. Superior heat preservation ensured by one-off molding polyurethane foam with thickness 55or 65mm.

4. Suitable for camping area, holiday residences.

5. stable and reliable performance, well wind resistance.

6. Meet the mankind healthy bath standard: The material of inner tank is SUS304-2B stainless steel plate; the silica

gel ring sealing has a long life against the erosion and it ie not harmful to health.