|
Detailed Product Description
stainless steel solar water
heater
The JINYI Solar JNS series stainless steel solar
water heaters, feed hot water by gravity, maximum pressure 0.5
bar.
These heaters need an assistant tank to the
supply the cold-water inlet (optional).
Inner and outer water tank shells are all are
made of stainless steel SUS304, food grade stainless steel plates.
Water is pure and but not recommend to drink. Heat insulation of
water tanks uses 55mm thick polyurethane foam.
Silicon rings are used to connect and seal all
tubing and joints.
All tubes and supports are adjustable and power
bearing is average, ensuring the long life of the vacuum tubes.
Glass vacuum tubes are made from super hard borosilicate glass 3.3.
Resistant to 25mm hail and a life of over 15
years.
These units come with a 5 years guarantee on the
tank and frame and 10 years guarantee on the
tubes.
All systems are ISO 9001 and CE
certified.
Specification:
Vacuum tube: 58 x 1800mm,
20tubes
Absorber coating: AL/N/AL
Absorptance: a=0.88-0.92
(AM1.5)
Tank capacity: 158litre
Tank & tube capacity:
216litre
Inner tank & outer tank: SUS304,
0.4mm
Insulation layer: 55mm
Assistant tank: 8L or 25L, with or without,
optional
Solar collector absorber area:
2.30m?
Testing pressure: 0.5bar
Inlet & outlet: 3/4"
Frame: Aluminium alloy, 2.0mm
Collector angle: 27, 38, 45 degree,
optional
Advantages:
Can he operated completely automatic if connect
with intelligent controller.
Simple structure, easy plug-in installation, can
be installed both on flat and inclined roof, and can be used with
an auxiliary electric booster as to provide tot water without
sunshine.
Superior heat preservation ensured by one-off
molding polyurethane foam with thickness 55mm.
Suitable for camping area, holiday
residences.
Stable and reliable performance, well wind
resistance.
Meet the mankind healthy bath standard: The
material of inner tank is SUS304-2B stainless steel plate; the
silica gel ring sealing has a long life against the erosion and it
ie not harmful to health.
|
