Detailed Product Description

.

The non-pressurized solar water heater is based on the natural circulation - thermosiphon phenomenon. it's the most cost-effectiveness and environmentally friendly way to harness solar energy for hot water appications,which is unsurpassed by any other solar thermal products, for its most high efficiency , low cost , and easy installation.

1)the most reliable, cost saving , efficient hot water heating solution.

2)Anticorrosion inner tank, low maintenance cost,

3)Simple struture, easy installation, labour cost saving.

4)Completely automatic operation with intelligent controller.

the vaccum tube freasure:

1 Borosilicate glass 3.3, diameter is 47/58. leng:1500/1800.

2the quantity is 10/12/15/18/20/24/30/36.

3 water capacity is 100L/115L/130L/155L/195L/235L/ /300L/360L.

4Absorber area is 1.34/1.6/1.78/2.15/2.69/3.23/1.88/2.25/2.5/2.5/3.01/3.75/4.5

5in the tube water keep clean and drinkable.

The vaccum tube quantity can be adjust according to your request.

The tank:

1 the inner water tank SUS304-2B.stainless steel.

2The out water tank shell, colored/ Enamel/stainless/fluorine carbon steel.

3insulation layer:High density, One-off molding polyurethane foam.

Bracket:Galvanized steel , aluminium alloy.stainless steel.

Function

1can be endure freezing -30 degree. and resistance diameter 25mm.

2no pressurized.

3keep the hot water temperature 72hours when the case of cloudy and rainy day.

We are chinese manufactory, produce mass solar water heater products more than 10years.

In the comtext of a growing global energy crisis, Jinyi has been established with a vision to identity and develop our efficient solar water heaters to satisfy your esteem customers,we are looking forward to establish a close cooperation with clientd from all over the world