Detailed Product Description
This high efficiency Evacuated Tube Separated Solar Water Heater
contains almost everything needed for a solar hot water heating
system. It can be easily integrated with your house, the solar
collectors can be installed on general different type of roofs, and
tank can be placed anywhere as you like.
The JINYI Solar JHC Range of Evacuated Tube heat pipe solar
collectors offer excellent value as they have both a very low cost
per kWh of output and a high efficiency. The collectors are also
very easy to transport and handle as the tubes can be disconnected
from the manifold of the collector.
The Evacuated Tube Separated Solar Water Heater
contains:
Solar thermal collector (evacuated tube or flat plate) which
absorbs solar radiation (sunlight) and changes it into heat;
Circulating pump which transfers the heat from the collector to
hot water in a storage tank;
Solar hot water tank accumulates the hot water produced by solar
energy so that it can be stored for use when needed;
Accessories which ensure the regulation and the safety of the
system;
Back-up heater (gas, oil, or wood fuelled boiler, immersion
heater or heat pump) which will bring the hot water to the
temperature required when there is not enough sunlight to do so
(mostly in winter).
In most area, solar collectors alone cannot provide all the hot
water for a household's needs throughout the year. Correctly sized
they will supply 60% of heat / domestic hot water needs. They are
normally installed in conjunction with a conventional back-up
heating system.
Solar thermal collector evacuated tubes collect and convert
sunshine energy into thermal energy, which is transferred to the
central heat pipes in the tubes through the aluminum fins bridging
the tube inner surfaces and the heat pipes. The copper heat pipes
have tiny amount of purified water sealed in them at depressurized
condition. When heated, the water inside the heat pipes vaporizes
at low temperature (about 30 deg. C). The vapor (steam) rises to
the pipe tips inserted into the water contained in the tank. Vapor
is cooled down and becomes condensate falling to the bottom of the
pipes. By continuously circulating this way, heat is carried from
outside to the water inside the tank.
Components:
1 x JHC-5818-18 heat pipe solar collector 2.30m? (1.687m?
aperture)
1 x 150 litre one coil 304 stainless steel tank including
insulation
1 x JPS1 solar pump station
Packing dimension:
Total 6cartons, 0.782m?
|