Detailed Product Description

Fiber Separator&Rubber Powder Collector,Fiber Separator&Rubber Powder Collector&Cooler

Fiber separator working principle is based waste tire recycling process fine crumb mix with nylon fibers which exists between the weight difference, different upward lift force generated in the role of air, powder falling through the hollow shaft points trays, and then flung to the wind guide cone cover, fan blade, fan blade high speed rotation of the updraft, the fan blade near the wind pressure lower than the sub-trays around the wind pressure. Would have resulted in a fine fluff fiber in the crumb rose float to reach the body wall, the land along the bottom cover surface of the body wall, and then discharged from the bottom cover cone end export pure rubber powder due to the large proportion of not float, eye deflector falls within the cone bucket is discharged from the discharge pipe, and thus completed the purpose of separating the fibers from the appearance point of view, separator, the upper section of a cylinder, the lower section of the cone, in order to facilitate disassembly , cover, with the upper section, the upper and lower sections are screw connection separating machine spindle is a hollow body, is equipped with two single row in the spindle lower end of the sleeve holder to the spherical bearing, and at its upper end packages unidirectional thrust bearing, used to support the rotation of the spindle. The spindle blades, fan blade plate, sub-cartridge, links into one, together with the spindle rotation. Within the body, through the four support plates with round hood welding solid. Cast in the wind is in turn connected to the  wind guide cone cover and the wind guide cover. With four centering block in the next segment of the bottom cover the supporting cone out of the hopper out of the bottom of the hopper welding a catheter for crumb rubber exports. Centerline angle of 30 °, a hopper, the upper end on the circumference welded to the deflector, the tapered end of the lower bottom cover is a fiber outlet.