|
Detailed Product Description
1. The batch cooler is used for cooling, folding and depositing the rubber strip that comes from the open mills or twin screw extruder.
2. Structure characteristics: There are two structures types: Overhead and floor-standing types.
3. The clients can choose high or low disposition according to the practical requirements.
4. The high disposition batch-off line has hydraulic auto wig wag section, which can battle the rubber strip tidily, the strip tidy ratio (< =100mm);
5. There are three working positions for auto entering and outputting of material tray.
6. Auto rubber collecting device; Auto cutter device; It has high atomization and can realize unattended operation.
Technical Parameter:
|
Item \ Type
|
XPG-600
|
XPG-900
|
|
width of the rubber sheet
|
600mm
|
900mm
|
|
cooling temperature
|
380V/50HZ
|
380V/50HZ
|
|
take-off linear speed
|
35M/MIN
|
35M/MIN
|
|
conveying linear speed
|
1.37M/MIN
|
1.37M/MIN
|
|
axial fan
|
KXT40-E4 0.37KW
|
KXT40-E4 0.37KW
|
|
take-off device reducer
|
XWD 1.5-4-1/23
|
XWD 7.5-4-1/43
|
|
lifting device reducer
|
XWD 1.5-3-1/11
|
XWD 7.5-4-1/23
|
|
rear take off reducer
|
XWD 1.5-3-1/11
|
XWD 7.5-4-143
|
|
total length
|
11m
|
12m
|
|
