|
Detailed Product Description
Rubber (plastic) Internal Mixer Rubber Internal Mixer mainly used for plasticizing and mixing of natural rubber, synthetic rubber, reclaimed rubber and plastics, foaming plastics, and used in mixing of various the degree materials.
Technical Advantages:
1. The diversity of rotor type can meet different mixing requirements. User can choose any kind of rotors (the mixer with different rotor has different total volume and working volume.
2. Drive system adopts DC motor or AC inverter motor to realize stepless speed adjustment or adopts Ac Motor with gear box etc. The drive system has the advantages of steady drive, lower noise and long service life etc.
3. The standard rotor adopts the right drive system. According to users needs we also can supply the left drive system.
4. Drive system adopts DC motor or AC inverter motor to realize stepless speed adjustment or adopts Ac motor with gear box etc. The drive system has the advantages of steady drive, lower noise and long service life etc.
5. On-site operation cabinets and electrical control cabinets adopt PLC communication, results in reduction of equipment troubles and installation cost.
Construction Features:
1. With completely condition, materials are mixed or plasticizing under certain pressure, controllable temperature, which makes high production efficiency and obtains excellent quality
2. Spiral angle and over lapping length of blades of the rotors are of reasonable design and make the materials to be dispersed uniformly
3. Surface where is contacted with the materials are all plated with hard chromium and polished, which is corrosion-resistant and wear-resistant
4. Jacket construction is adopted in parts that surfaces contact with materials to achieve excellent water-cooling or steam heating effect and fit in with the needs of plastics and rubber processing technology
|
Model
|
X(S)M-30X40
|
X(S)M-50X40
|
X(S)M-80X40
|
XMN-90X(6～60)
|
X(S)M-110X40
|
X(S)M-110X(6～60)
|
|
Total Volume of mixing chamber (L)
|
30
2-wings
|
50
2-wings
|
80
2-wings
|
87
Meshing rotor
|
110
2-wings
|
108
4-wings
|
|
Working Volume of mixing chamber (L)
|
20
|
30
|
60
|
56
|
82.5
|
81
|
|
Speed of rear rotor (r/min)
|
40
|
40
|
40
|
6～60
|
40
|
6～60
|
|
Speed ratio of rotors
|
1:1.16
|
1:1.15
|
1:1.15
|
1:1
|
1:1.15
|
1:1.15
|
|
Pressure of compressed air (MPa)
|
0.6～0.8
|
0.6～0.8
|
0.6～0.8
|
0.6～0.8
|
0.6～0.8
|
0.6～0.8
|
|
Consumption of compressed air (m3/h)
|
～15
|
～20
|
～35
|
～140
|
～60
|
～60
|
|
Pressure of cooling water (MPa)
|
0.3～0.4
|
0.3～0.4
|
0.3～0.4
|
0.3～0.4
|
0.3～0.4
|
0.3～0.4
|
|
Consumption of cooling water (m3/h)
|
～8
|
～10
|
～25
|
～25
|
～35
|
～35
|
|
Steam pressure (MPa)
|
0.5～0.8
|
0.5～0.8
|
0.5～0.8
|
|
0.5～0.8
|
0.5～0.8
|
|
Steam Consumption (m3/h)
|
～90
|
～200
|
～300
|
|
～720
|
～720
|
|
Driving motor power (KW)
|
55
|
110
|
220
|
520
|
250
|
450
|
|
Dimension (mm)
|
3070X3135X3650
|
5910x2510x3200
|
7000x2760x4500
|
7040x2865x4150
|
6620x2640x4392
|
7800x2855x4392
|
|
Gross weight (excluding main motor) (ton)
|
～7.8
|
～14.85
|
～23
|
～23
|
～24
|
～24
|
|
-Internal-Mixer-1343893643-0.jpg)
