print page - Rubber Mixing Mill (22"- 28")

Rubber Mixing Mill is used for the rubber compounding and sheeting.This rubber mixing machine ensures the perfect and uniform blending of natural and synthetic rubber with other raw materials. The machine mixes all the raw materials to the desired.

1. The rolls are made of chilled cast iron. The roll surface is hard and wearable. The internal cavity is processed to make temperature well proportioned on the roll surface.
2. The machine is equipped with an overload protection device to prevent the major components from being damaged due to overloading.
3. The machine is also equipped with and emergency device. When an emergent accident happens, just draw the pull rod, and the machine will stop immediately. It is safe and reliable.
4. The transmission system adopts a hard facing gear reducer, which has a compacted structure with higher transmission efficiency, lower noise and longer service life.
5. The base frame is a whole framework, which is convenient for installation.

Model	XK-550B	XKY-610	XK-660	XKY-660	XKY-710
Roll Diameter(mm)	￠550	￠610	￠660	￠660	￠710
Roll Working Diameter(mm)	1500	1830	2130	2130	2200
Front Roll Speed(m/min)	28.32	30	28.13	32	32.53
Fraction Ratio of front/back Roll	1:1.22	1:1.09	1:1.24	1:1.09	1:1.09
Remark	Available rolls types: cored smooth roll, cored fluted roll, circumferentially drilled smooth roll.
Instruction	We can design different types according to the clients detailed requirements for this series of mill, for example: equipped with to and fro type stock blender, five fingers type stock blender, manual rubber cutter, pneumatic controlled rubber cutter and hydraulic stock guide.