Detailed Product Description
12v Lead-acid Battery Charger Instruction
The improper Charge/Discharge
maintenance of Lead-acid battery cause enormous abandoned resources
waste and environmental pollution. The charge current of Li-ion
battery must be controlled precisely, otherwise, the slightest
mistake will guide an explosion caused by high temperature of the
battery. This charger adopts a microcontroller to control the
switching power, applicable for rated frequency AC50 / 60Hz, rated
insulation voltage AC500V, rated working voltage AC180-240V power
grid, rated output current DC3A-40A. This charger series, used in
yacht, ships, electric cars, electric bicycles, UPS, generator to
charge and maintain the Lead-acid battery , mainly possess the
following features:
1:
The charger successfully achieve the
safe and effective maintenance of lead-acid battery, extending
battery life and reduce battery waste, giving full satisfaction to
energy-saving and environmental protection.
2:
The improvement of voltage control accuracy, on one hand, it
solves the problem of prophase capacity loss(PCL) and product
heating caused by the inaccurate current density. On the other
hand, it realize the intelligent central management of multiple
battery parameters, which could avoid the safety problems of over
charge/discharge, effectively increase the fault- free working time
, extend battery life
3:
The hardware monitor instrument has self-protection function of
short-circuit, overloading and thermal, which is the same with
software charger. Nevertheless, the level of software is lower than
the hardware. Besides, the software could identify whether the
polarity of battery is correct or wrong. when the battery is wrong
, it will refuse to connect with relay, saying the charger is not
able to output voltage and current.
4:
When the charger adopts the charging technology 'pulse
function', it will add some negative pulse the deal with
polarization, acting a role of fast charging without heating the
battery. in the process of charging the battery ,the charger repair
and maintain the battery accurately, saying it has battery capacity
automatic recovery function; (Note: not suitable for using as a
professional repair instrument).
5:
The Software monitors the temperature of key components
(transformers, heat sink), under abnormal temperature
circumstances, it will reduce the output power. If it failures to
reduce the temperature, the power will be cut off to avoid
damaging the monitoring instrument.
|