Detailed Product Description

Triplex Multiple Pin Cold Feed Rubber Extruder is applicable to compound extruding types of tire tread, also other rubber products.

At room temperature, rubber plate can be feed directly without hot smelting in the extruder. The products extruded have good compact ability. The extruder has the advantages of high capacity and low energy consuming. The lugging system uses direct current speed change, the range of speed change is wide, that system also small volume and ability of accurate controlling.

The extruder has multiple-heads that are all driven by fluid power. With fluid drive, the multiple-heads are easy to open, close and lock. The flow passage board, pre-outlet guide and outlet guide can be changed according to the specification of product, ensure the size of shaped stable.

The extruder has a temperature control system that can automatically set temperature. It can adjust process temperature at the range of setting, and ensure the temperature during product extruding.

Type	XJDF-90×120×150	XJDF-120×150×200	XJDF-120×150×120
Screw shaft diameter mm	90×120×150	120×150×200	120×150×120
L/D ratio	12D×14D×16D	14D×16D×16D	14D×16D×14D
Screw shaft speed r/min	60×58×45	58×45×32	58×45×58
Produce capacity kg/h	2880	5180	3360
Motor power	40×75×185	75×185×280	75×185×75
Motor type	DC. Speed Regulation Motor
TCS	Automatic TCS