|
Detailed Product Description
Customs fees, taxes, duties are the buyers responsibility.
Horizontal HY-400WL,600WL,1000WL (5blades) Residential Wind Turbine
Feature of 400w,600w and 1000w 5 blades wind turbine
*High Efficiency
*Light breezer start up
*Free of maintenance
*Light weight
*Easy intallation
*Heavy wind self-protection
*Minimal vibration & Low noise
*Damp-proof & sand-proof
*Long lifespan over 15 years
Parameter of 400w,600w and 1000w wind turbine
|
Type
|
HY-400WL
|
HY-600WL
|
HY-1000WL
|
|
Rated Output
|
400W
|
600W
|
1000W
|
|
Peak Output
|
500W
|
750W
|
1200W
|
|
Rated Voltage(V)
|
DC12/24
|
DC24/48
|
DC24/48
|
|
Start-up Speed
|
2m/s
|
2m/s
|
2.5m/s
|
|
Cut-in Speed
|
2.5m/s
|
2.5m/s
|
3m/s
|
|
Rotor Diameter(m)
|
1.55
|
1.75
|
1.96
|
|
Swept Area (m2)
|
1.89
|
2.4
|
3
|
|
Rated Charging Current (A)
|
33.3/16.7
|
25/12.5
|
41.7/20.8
|
|
KWH/month (monthly avg. V=5.5m/s)
|
82
|
91
|
175
|
|
Net Weight
|
22KG
|
25KG
|
28KG
|
|
Quantity Of Blades
|
5
|
|
Rated Rotor Speed (RPM)
|
750
|
|
Rated Wind speed(m/s)
|
12m/s
|
|
System Average Cp.
|
more than 0.36
|
|
Working Temp. range °C
|
from -40°C to 60°C
|
|
Survival Max. Wind
|
50m/s or 110mph
|
|
Over-speed Control
|
Electromagnetic & blade aerodynamic braking
|
|
Blade Material
|
Reinforced nylon glass-fiber
|
|
Generator Type
|
Brushless 3-phase with permanent Neodymium Magnet
|
|
Generator Material
|
Aluminum alloy body & precision stainless steel rotor
|
|
Noise Level
|
less than 20dB (5m behind turbine @ 5m/s gusting)
|
|
Tower Connection
|
Flange connection
|
|
Lifespan(years)
|
15
|
|
Warranty (years)
|
3
|
|
Years On Market
|
7
|
There are four working videos of HY400W,600W,1000W in youku web.
1.low start up wind speed http://v.youku.com/v_show/id_XMzUyOTUyODI4.html
2.performance1 http://v.youku.com/v_show/id_XMzUyOTU3MjIw.html
3.performance2 http://v.youku.com/v_show/id_XMzUyOTU3NzE2.html
4.generator test http://v.youku.com/v_show/id_XMzUyOTU3OTU2.html
You will believe what you see.
Why we can be your wind turbine supplier?
The reassn can be found as belows:
1*BLADES:
HY400W/600W/1KW
Blades are made from reinforced nylon
glass-fiber by using advanced thermoplastic engineering and precision injection molding technology for higher strength,flexibility and reliability.
2*Generator Housing:
HY400W/600W/1KW
made from high-quality rare earth permanent magnets material. The wind turbine is of small size, light weight and
high-efficiency power generation.
3*Rotor and housing
Patented rotor is made of high quality
stainless steel rotor shaft attached with permanent neodymium magnet, the unique winding and multi pole design reduces the start-up torque of alternator which assures generator would produce more power at lower wind condition than other system.
4*Innovative slip ring design
HY400W/600W/1KW
HY Series Wind turbines with typical slip ring design often twists and
tangles the connection cable from generator to controller, which made the system has to be maintained every few month. HY Energy patented slip ring design solved this problem completely and made HY wind turbine with higher reliability and real maintenance free.
5*Maintenance Free Design
Innovative two-moving-part system
Typical
wind turbine has three moving parts(rotor,head yawing and mechanical
furling).HY Energy replaced mechanical furling by using advanced
electromagnetic and blade aerodynamics braking and take only two moving
parts, which improves generator reliability dramatically as it has less
mechnical failure.
6*Structure
7.Factory show
8.Recommend using draft:
9*Certifications:
10*The wind turbine project show:
  
11.How to install:
12* How to Set:
There are two basic requirements for a good site: high average wind speed and low wind turbulence.
1.The higher average wind speed, the more power will HY series wind turbine generates.
The
wind power is proportional to the cube of wind speed. For instance, the
energy contains in the wind speed of 5m/s is approximately as 2 times
higher than wind speed of 4m/s.
2. It will against the long term operation of the wind turbine if the
sitting locatioin in an unstable wind-flow region or in a serious
turbulent-flow region. Moreover, this serious turbulent flow not only
causes destructive force to the wind turbine, but also dramatically
reduces power generation of the wind turbine.
Install
the wind turbine as high as possible. Since the higher location, the
greater wind speed it will be the more stable wind blow, the more stable
power can be generated.
In flat area, the recommended installation heigh for the HY series is not less than 8 m above ground level.
Bushes
and buildings can be assumed as barriers to the wind flow, before and
behind these barriers, it could form a sluggish and disorder turbulent
flow area in which the wind turbine couldn't generated stable power
output. It should be avoided to install the wind turbine in the
turbulent flow area. The highest of tower should be 2 meters higher than
the highest building within 100 m radius.
Furthermore, plesse obey related local legalization and regulation.
13* Which kind of inverter and battery is fit to you?:
Inverter: for customer who need AC electricity. It is recommended to configure 200V(or 110V)50Hz or (60Hz) controller/inverter.
Battery:
Two pcs 200Ah/12V batteries are recommended for HY400W wind turbine.
Two pcs 200Ah/12V batteries are recommended for HY600W wind turbine.
Four
pcs 200Ah/12V batteries are recommended for HY1000W wind turbine.
Negative pole of battery should be connected to the ground perfectly.
You can call us at any time if there is any questions on our productions.
If you want to know more information, pls contact us without hesitates.
|
