Solid&Engineered Wood Flooring Manufacturer from China

After the three-layer solid wood composite floor is laid, it should be used for at least 24 hours, otherwise it will affect the effect of the three-layer solid wood composite floor. Generally, the three-layer solid wood composite floor has poor water resistance, and it is not suitable to wipe it with a damp cloth or water to avoid tarnishing. In the future life, three layers of solid wood composite flooring must be cured. The specific measures are as follows:
(1) The humidity in the room should not be too large, keep the floor dry, smooth, and clean daily. Use a cotton swab to dry it. If it is stubborn, use a neutral cleaning solvent and wipe it with a cotton swab. Do not scrub with organic solvents such as acids, alkaline solvents or benzine.
(2) During daily use, care should be taken to avoid scratching the floor with heavy metal sharps, glass tiles, studs, etc.; do not let the floor touch open flames or place high-power electric heaters directly on the floor; do not place strong acid and strong on the floor. Alkaline substances; long-term water immersion is absolutely prohibited.
(3) In order to maintain the beauty of the three-layer parquet and extend the service life of the paint, it is recommended to wax twice a year. Wipe the floor clean before waxing, then apply a layer of floor wax evenly on the surface. After a while, wipe it with a soft cloth until it is smooth and bright.
(4) If large-area flooding occurs inadvertently or if it is partially soaked in water for a long time, if it is stagnant, it should be dried with a dry cloth in time and allowed to dry naturally. It is strictly prohibited to use an electric heater to dry or explode in the sun.
(5) Prolonged exposure to strong sunlight, or rapid rise and fall of temperature in the room may cause premature aging of the parquet surface, and should be avoided as much as possible.
(6) If the installed place is not lived, keep the indoor air circulation, and do not cover it with plastic paper or newspaper, so as to avoid the surface paint film sticking and losing luster.
(7) Regularly clean the floor, vacuum, and prevent sand or frictional dust from accumulating and scratching the floor surface. A doormat can be placed outside the door to prevent sand or frictional dust from being carried indoors. You can use a wrung cotton swab to wipe the floor when cleaning the floor. Do not wipe the floor with a wet mop or a corrosive liquid such as soapy water or gasoline.
(8) If the outdoor humidity is greater than the indoor humidity, you can close the doors and windows to keep the indoor humidity low. If the outdoor humidity is less than the indoor humidity, you can open the doors and windows to reduce the indoor humidity. In the hot and humid weather, you can turn on the air conditioner or electric fan.
(9) In the autumn and winter seasons, in order to increase the indoor air humidity, a humidifier can be used to keep the indoor air humidity at 40%-80%.
(10) When moving furniture, it should not be pushed and pulled directly on the floor. It should be lifted and moved gently. Frequently moving furniture can be glued to the bottom of the piece.
Maintenance Tip: The cleaning method for special stains is: oil stains, paints and inks can be wiped out with special stains; if it is blood stains, juice, red wine, beer, etc., you can use a damp cloth or a rag to apply a proper amount of floor cleaner. Wipe; do not use strong acid-base liquid to clean the wooden floor.