It was warm and high service applications, but too late to be used for low temperature applications, since the prices are reduced. Therefore, Flake graphite now considered to be cost-effective, high heat / pressure of the material.

The materials are made from pure exfoliated graphite GASKET provides excellent sealing properties, to a large range of temperatures, pressures and chemical homogeneous material is free of respirable fibers, binders and additives

Flake GRAPHITE sheets may be significantly more aggressive chemical environments (other than powerful oxidizing environments) and higher pressures than standard non-asbestos materials Metal GASKET GRAPHITE can be installed in even higher pressures.

It has a unique heat resistance to withstand temperature extremes over the plasma level. Reduction GRAPHITE clean environment can handle up to 5000 F.

These panels are usually available in thicknesses from 1/32 "is», - Armenian Banks - thick.

Standard Class 95% - 98% - Clean Graphite sheet % and 99.5% of the available nuclear grade. Graphite is very flexible and is able to flow into flange surface imperfections. It is a low permeability and chemical resistance make it an ideal choice as a sealing material.

In oxidizing atmosphere, while in the past it is not recommended to use graphite, but with inorganic passivation inhibitor to increase its oxidation and corrosion, but now it has increased the scope for further use.

Use applications for stiffness, which is better, high pressure seals the operation, reinforced for GRAPHITE introduced, which is another milestone in the sealing industry.