Product Description

Product characteristic
1. Under the vacuum material solution boiling point lowering, causes the evaporator the heat transfer propelling force to increase, therefore to is certain thermal output may save the evaporator the heat transfer area.
2. Evaporates the operation heat source to be possible to use the low pressure steam or to give off heat the steam.
3. Evaporator less loss of heat.
4. Front is dry may carry on disinfection processing, in the drying in transit, having nothing impurity mixes in, conforms to the GMP requirement.
5. Belongs to the static type vacuum drier, therefore the dry material physique cannot damage

Application scope
Is suitable to is easy under the high temperature to decompose, the polymerization and the deterioration the material low temperature is dry; Widely is used in profession and so on drugs manufacture, chemical industry, food, electron.

Principle of work
The so-called vacuum is dry, is in the dry material under the vacuum condition, and carries on heats up dryly. If carries on pumping air using the vacuum pump to pull out wet, then sped up the drying velocity.
Note: If uses the condenser, in the material solvent passable condenser has performed to recycle; If uses the SK series pendular water ring vacuum pump, but does not use the condenser, saves the energy investment.