Detailed Product Description
Detailed Products Description: JMT、JDT 3-way actuated valve
Specifications:
1. Nominal diameter: DN(mm) 25、40、50、65、80、100、125、150、200、250、300
2. Nominal pressure: ANSI 150、300、600 Lb;JIS 10、20、30、40 K;PN1.6、2.5
3. Product material: WCB / SCPH2,WC6/ SCPH21,WC9/ SCPH32,C5/ SCPH61
4. Product Standard Design according to the provisions of ANSI B16.5;JIS B2201;HG20596(or GB9113-2000)
Main features:
1. 3-way valves used for regulating the occasion of interconnected three way channels, there are two kinds of patterns: collecting and dividing. dividing three-way valve is to divide one-way fluid into two-way flow fluid; collecting three-way valve is to merge two-way flow of fluid into one way
2. When DN and the pressure is small, collecting valve can be used to divert occasions, but the nominal diameter bigger than 80mm and pressure diversion occasions is biggish, can only use the dividing valve.
3. Control valve equipped with multi pneumatic spring film implementing structure,compact structure, big output power.
Standard technical parameters
Valve Body Part
Type: 3-way cast ball valve
DN: flow collecting valve:DN25、40、50、65、80、100、125、150、200、250、300
flow divising valve:DN80、100、125、150、200、250、300
PN: ANSI 150、300、600 Lb;JIS 10、20、30、40 K;PN1.6、2.5、4.0、6.3MPa
Connection Type: Flanged:RF、RJ、FM,Standard ANSI B16.5;JIS B2201;HG20596(or GB9113-2000)
Valve, valve cover material: WCB / SCPH2,WC6/ SCPH21,WC9/ SCPH32,C5/ SCPH61,CF8 / SCS13A, CF8M / SCS14A
Upper valve cover type: Normal temperature type(P):-17~+230℃
Elongation type Ⅰ(E1):-45~-17℃; +230~+450℃
Gland type: Clamp-Bolt type
Filler: PTFE、V-filler, flexible graphite filler and so on
Gasket: Metal gear pads, Graphite Spiral Gasket
Valve inside parts
1. spool Type: V-notched spool
2. Flow characteristics: Linearity(LV)、Equal percentage characteristic(%V)
3. Valve inside Parts Material: 2Cr13、9Cr18MoV、304、316、304+ST、316+ST etc
Executing agency
Tpye: Multi-spring diaphragm type implementing agencies
Diaphragm Materials: Ethylene-propylene rubber Nylon
Spring Range: 0.04~0.12、0.04~0.20、0.08~0.24Mpa
Gas supplying Pressure: 0.14~0.35Mpa
Gas source connector: Rc1/4
Environment Temperature: -30~+70℃
Optional Accessories: Locator、Air Filter Decompression Valve、Solenoid valve、schedule switch、Handwheel organization, others
Note: This valve may also match with the JPQ air cylinder piston implementing agency or the electric implementing agency
Whole Performance
1) Function way: gas close type (active implementing agency); gas-open type (reaction implementing agency)
2) Adjustable ratio: 30:1(≤DN150),10:1(>DN150)
3) Valve seat spillage: Metal valve seat: Tally FCI 70-2-1998(ASME B16.104) and GB4213-1992 gradeⅣ,smaller than fixed Cv’s 0.01%(≤DN150)
4) Tally FCI 70-2-1998(ASME B16.104)and GB4213-1992 grade Ⅲ,smaller than fixed Cv’s 0.1%(>DN150)
5) Returning Difference: 3% smaller than the full travel(without locator), 1% smaller than the full travel(with locator)
6) Line Nature: ±5% smaller than the full travel(without locator), ±1% smaller than the full travel(with locator)
Note: Using the standard V-type PTFE filler
|