Detailed Product Description

[step] dry paste method using tools: clean dishcloth, scraping, credit card
Paste position 1, clean body, conditional can be used without fibre shedding cloth dipped in 50% alcohol or isopropyl alcohol or acetone to scrub, can also be used soap and water; the surface solvent cleaning should be completely volatile solvent available at the rear.
2, the transfer film (paste onto the transparent glue film) together with the car to lift; in general, slowly pastes, side by side tool strickle, Jiedi paper.
3, if car length and width of less than 10 cm, can put the stickers are torn off and then paste. But be careful, don't fall accident or ground sticky dust adhesion.
4, with a clean cloth or scraping [such as calling card or credit card] on the transfer film repeatedly forced inclined brushing or scraping a few; no bubble until the car, and then rip [transparent] transfer film can; recommendation 24 hours do not exposure or car wash.
[method] the wet paste in car or a large car stickers for double operation] [recommendation
[method] wet paste steps using tools: watering can, clean cloth, scraper, knife, duct
1, will need to paste the face clean in the glass of water please spray on the need to paste surface preparation before pasting paper (clean body, the body will stick with Penhu water-jet) -- is mainly used to reduce viscosity, easy to adjust position sticker.
2, identified the need post position, together with the car from right to left to [or from top to bottom] have side and wipes the pressed on the car, and then stick with a rag, side side flat, while propose paper.
3, meet the door handle or strip according to the situation of the material cut and? Window Jiao Di Dian?
4, timely adjustment of the graphics, determine the correct location, scraper repeatedly scrape water and bubble, using scraper is from right to left oblique scraping.
5, when the doors and joint with a knife divided into paste, inwards.
6, try to let the car in the water dry, the conditions can be hairdryer moderate heating and drying. Suggestion: try not to exposure within 24 hours, 48 hours not washing