Detailed Product Description

A new generation of 3 layers of color film
The first layer (protection layer to protect the color film in the construction will not be scraping wound, after the completion of construction of tear.)
Second layers of color film (in part of the decorative lamp)
Third layer release film (color film at the end of the paper, the construction of torn off at the end of paper)

Smooth good transparency, color is not deep, smooth surface, generally used to paste the headlight.
The surface color, opacity, surface grinding, generally used to paste the taillights, or fog lamp

General car three car whole car takes about 19 meters. Such as: length of about 5 meters

on both sides adds up to about 10 meters; the front of about 1.8 meters; the front about

1.6 meters; the roof about 1.8 meters; the tail car about 1.5 meters; the tail of the

car surrounded by about 1.8 meters. Hatchback car takes about 16 meters around the.
Note: small area of paste can do it yourself, let you fully enjoy the fun of DIY
Paste the tools required 1, scraper
2, the electric gun or hair dryer
3, the knife
4, the best preparation for a matching kettle
Carbon fibre paste operation instructions:
Surface cleaning of 1: to paste clean
2: is ready to please the glass water sprayed on the surface to paste paste paper before
3: sticker and bottom paper separation and uniform spraying of water glass
4: sticker flat attached to the need to paste surface
5: scraper water completely out, (this step is very important!! Otherwise it will

produce bubbles!) In order to ensure the smooth surface
6: edge with grilled gun or hair dryer baking, to ensure the smooth and strong edge

effect. Be accomplished!!
A large area of the adhesive to automotive beauty shop master please help.