print page - 4channel HDD Car DVR with 3G and GPS Function H. 2

4Channel HDD Car DVR with 3G and GPS Function H. 264 (HT-6606)

Main functions:
1. Use hard disk as storage medium, convenient and quick
2. Adopting lastest h. 264 compression format; Support HD video.
3. Support 1-4 channel h. 264 image recording in real time and 1-2 audio record.
4. With maximum 6 sensor for input interface, 2 for RS485, and 3 for RS232
5. Small and exquisite, wide temperature range, super anti-vibration, simple installation.
6. Background software is powerful in its function, the system runs stably.
7. GPS driving display latitude, longitude, driving speed and alarming when overspeed.
Mastering driving condition in real time.
8. 3G wireless image transfer to the monitoring center, support EVDO, W-CDMA and TD-SCDMA

Spec.
Operating voltage: DC: +8V--+36V
Working temperature: -25-60
Current output: : 12V 2A 5V 2A
Video input: 1-4 channel composite video, 1.0V impedance 75Ω
Audio input: 1 channel audio, impedance 600Ω
Data storage: 256M-64G
Formats: H. 264 compression formats
Video frame rate: PAL: 25(fp/s) NTSC: 30(fp/s)
Wireless network: Built-in 3G module
Record replay: Support single picture preview
Video mode: Ignition, timing, manual and event binding.
Size: 111*114*48mm

Function	Item	Description
Recording System	Channel	1-4 channels
	Resolution	Support CIF, HD1, D1 resolution, compatible with 2CH of D1 & 2CH of CIF. fps: 1 to 25f/s/ch adjustable (PAL) or 30f/s/ch (NTSC).
	Video Quality	1-4 levels, 1 is the highest level and 4 is the lowest level.
	OSD	Overlays information such as datetime and vehicle ID
	SD card REC	.
	RecordingMode	The default setting is auto recording after power on. Timed recording and alarm recording are supported.
	Preview	Support 1 channel and 4 channelspreview.
	Disk Data overwritten	Support SD cards overwritten function.
Playback System	VideoSearch	Search video files anytime per day, type(n/a) and target SD card.
	Playback	Support1 to 4 channelsplayback.
	Playback	Support forward and backword playat thespeedof: x 2, x4, x8, x16.
GUI	GraphicalUser Interface	Setup system parameters with the remote control.
Alarm	Input	Support up to 6 channels alarm input.
	Input	Pre-record 10seconds ahead of the alarm. Record duration after alarm can be set in system
	Output	Support up to 1 channels alarm output, level signal.
Optional Function	GPS	GPS module can be built-outdevice HT-6606, the GPS info will be recordedsynchronous; HT-6606Support external GPS module
	Network	RJ45 Ethernet port.
	Network	HT-6606supports several wireless modulessuch as 3G and WIFI
	G Sensor	Built in G-sensor is available with HT-6606
Others	Power Settings	System auto power on/off: 1, Vehicle acc on/off---system auto power on after acc on, system power off according to the delay time (up to 240min, default 5min) after acc off. 2, Preset time---Only according to time preset table.
Others	Power-off protection	With the power-off protection, all data can be saved safely and the recording can be closed normally after power failure.