|
Detailed Product Description
the description of B-Type Mechanical Horizontal-Moving Curing Press for OTR Tires
Application
The B-Type Mechanical Horizontal-Moving Curing Press for OTR and Bias Tires is applicable for curing OTR and bias tires with nitrogen or steam as curing medium.
Introduction
This B-Type Mechanical Horizontal-Moving Curing Press for OTR and Bias Tires is a mechanical type with single cavity, the beam moves vertically and horizontally for tire loading and unloading. The center mechanism is BOM type and curing mould is heated by steam dome. Other features of this type are: single column vertical chuck loader for both loading and unloading device, PCI and green tire holder are available. Curing piping can also be made to order.
This B-Type Mechanical Horizontal-Moving Curing Press for OTR and Bias Tires uses PLC for real-time control, and industrial PC for human-machine operation interface. All parameters can be reset during curing cycle, and real-time data collection/ preservation, alarming, as well as data back dating can also be realized through this system. With Ethernet interface, curing press group-management is available.
Main parameters of B-Type Mechanical Horizontal-Moving Curing Press for OTR and Bias Tires
|
Item / Parameters
|
LL-B1900×6470
|
|
Curing Cavity Qty.
|
1
|
|
Steam Dome Nominal Dia. mm
|
φ1900
|
|
Max. Mould Closing Force, KN
|
6470
|
|
Mould Height, mm
|
380-730
|
|
Center Mechanism
|
BOM
|
|
Bead Dia. in
|
20-38/ SGM 20-32
|
|
O.D. of Curing Tire, mm
|
SGM
|
φ1350
|
|
2-piece mould
|
φ1600
|
|
Max. Green Tire Height, mm
|
950
|
|
Designed Mould Open/Close Time, s
|
86
|
|
Max. Load of VCL, kg
|
600
|
|
Max. External Pressure, Mpa
|
0.7
|
|
Max. Internal Pressure, Mpa
|
2.8
|
|
Hydraulic Water Pressure, Mpa
|
2.1-2.5
|
|
Compressed Air Pressure, Mpa
|
0.7
|
|
Control Air Pressure, Mpa
|
0.35
|
|
PCI Inflation Pressure, Mpa
|
1.4
|
|
PCI Rim Width, Mpa
|
495
|
Remark: As max. O.D. and max. thickness of cured tire are related to the mould dimensions, the max. O.D. shown in the above table are estimated value.
|
