Detailed Product Description
485P RS232-RS485 Converter
Model No. |
ACB-07 |
Product Name |
485P RS232-RS485 Converter |
Basic Info |
Unit Size |
108mm * 88mm * 23mm |
Unit Packing Way |
BOX |
Accessories |
User Manual, warranty card |
FEATURES |
General Introduction |
RS232-RS485 Converter is the RS-232 RS-485 serial signal inter-conversion, differential half-duplex, network-based active converter between RS-232 and RS-485. This product has features of a strong drive capability, simple and practical interface ,anti-lightning, anti-surge, anti-static, stable design and performance, beautiful appearance and so on. It comes with power indicator and data traffic lights to direct communication fault conditions. It's a cost-effective and good performance data interface conversion item. |
Important features |
Jumper-free DIP switch setting, adaptive connections, simple wire conecting,direct and clear communication situation feedback,, easy installation , maintenance and troubleshooting |
Three –level international standards for lightning protection design, lightning hit 50 consecutive 5000V is not bad, and it's safe and secure with relative level index of anti- static and anti-surge indicators,. |
Purpose |
Increase the transmission distance between the controller and compute. If 232 communication generally support transmission distance within 20m, it will support over 1000m with use of 485P convertor. |
Notes |
485+ and 485- the two must be mutually twisted-pair cable, you can use one pair of the four pairs cable. |
485 must be hand in hand, bus-type structure that is resolutely forbidden star connection and branching connections. |
|
|
PARAMETERS |
communication distance |
≤ 1200m(proposed within 800m) |
load capacity |
≤ 256 unit (proposed 100 units or less) |
Baud rate |
110 - 38400 bps adaptive |
Standard |
EIA RS-232,RS-485standard |
input power |
DC9V ≥300mA |
Operating temperature |
-40℃-70℃ ℃ |
Relative Humidity |
0-95% |
|