Detailed Product Description

Network Cable Tester (NT-2008)

Description:

Network Cable Tester is a powerful special tool to prevent and solve cable installation
problem. Network cable tester is the best choice to verify any speech and data cable
installation procedure. The tester is capable to have a number of tests such as cable connection sequence, length , user jumper and cable connection continuity and determine any open circuit, short circuit, jumper or cross-talk interference. It is a useful tool to reduce cable installation cost and save cable installation time.

Product Features

◆One person enough to complete cable continuity check
◆Checks wiring error in 5E, 6E, coaxial and telephone line
◆Such as open circuit, short circuit, jumper wire, reverse connection or cross-talk interference
◆Locates the wiring or connection error
◆Measures cable length and determines the distance of open circuit and short circuit
◆Dynamically calibrates cable length and makes length measurement as accurate as 97%
◆Simple and easy use, big screen to display test clear
◆Portable unit with long battery life (wait-case 50 hours)
◆Automatically time-delay shut off
◆Measures length and pair with or without far-end recognizer
◆Locates cable and there are 8 far-end passive test jacks (ID no.: ID1 - ID 8)
◆Far-end recognize with prompting voice
◆Self-checking function and automatically compensates any change in battery capacity or  

   ambient temperature
◆Single board computer software watchdog design and reliable operating

Technical Parameters
1) Overall Dimension:180x80 x40mm
2) Power Supply: 4x1.5V Size AA batteries with power consumption 16mA
3) Display: Special 4x16 character big screen LCD lattice (valid visual field 61.6 25.5 mm)
4) Type of Test Cable: STP/UTP twin twisted cable, coaxial cable, telephone line
5) Working Ambient Temperature: -10~+60
6) Tester Port:
    Tester RJ45 master port(M), tester LOOPBACK RJ45 port(L), far-end recognizer RJ45 port

   (R). The extra BNC and RJ11 converters are used to measure and check the continuity of  

    coaxial cable and telephone line.
7) Length Measurement of Twin Twisted Cable:
    Scope: 1350M(31,200ft)
    Calibration accuracy:3%( 0.5M or .5ft)(calibrating cable 5M)
    Shipment accuracy :5%( 0.5M or 1.5ft).(AMP,AT& T Class 5 cable)
    Display: M or ft
8) Length Calibration:
    User can set calibration factor by himself with a given length cable. The length of

   calibrating cable is more than 5M
9) Wire Sequence and Locating Cable Error:
    Check errors such as open circuit , short circuit , reverse connection, crossover or

    cross- talk interference.
10) Locating Cable: 8 far-end passive test jacks (ID 1 ID 8)
11) Automatic Time-delay Shut Off Time: The tester does not operate for 30 minutes.

Standard Configuration