Detailed Product Description

Commercial Plywood

Specification:

Core:Poplar,hardwood,combi core

sizes:1220*2440*2-25mm,915*2135mm,1250*2500mm

Glue:MR,WBP,E1,E2

F/B:Okoume/bintangor/Cedar/meranti faces

Grade:BB/BB,BB/CC,CC/CC

Thickness Tolerance:0.2-0.5mm

Denstity:520-550kgs/cbm

Terms:

Payment:30% T/T inadvance,Irrevocable L/C at sight

Delivery:About 20 days after confirmation

Conveyance:20FCL/40GP/40HQ

MOQ:20FCL=21.5CBM

More or less:5%

Market:East Euro,middle east,south America,Asia etc.

Packing:

Export pallet packing

Inner covered with plastic bag

Outer wrapped with carton paper and steel tapes for strength

Pls contact:0086-13791612272  RITA

Softwood plywood is usually made either of Douglas fir or spruce, pine, and fir (collectively known as spruce-pine-fir or SPF), and is typically used for construction and industrial purposes.^[1] Plywood is one of the most widely used wood products. Plywood is flammable, flexible, cheap, workable, recyclable, and can usually be locally manufactured. Plywood is made from thin layers of wood that are peeled from trees. These layers (or the veneer) are then glued together to make plywood. The grain of plywood not only runs in one direction, but each layer runs in the opposite direction, this is one of the reasons why you can only buy plywood with odd layers, it's so that it looks like a natural piece of wood. Because of the way plywood is bonded (with grains running against one another and with an odd number of composite parts) it is very hard to bend it the opposite way to the grain line. A common reason for using plywood instead of plain wood is its resistance to cracking, shrinkage, twisting/warping, and its general high degree of strength.