Detailed Product Description
These are thrust bearings containing convex rollers. They have a
self-aligning capability and are free of any influence of mounting
error or shaft deflection. Besides the original type, the E type
with pressed cages for high load capacity is also available. Their
bearing numbers are suffixed by E.
For horizontal shaft or high speed application, machined brass
cages are recommended. For details, contact NSK. Since there are
several places where lubrication is difficult, such as the area
between the roller heads and inner ring rib, the sliding surfaces
between cage and guide sleeve, etc., oil lubrication should be used
even at low speed. The cages in the original type are machined
brass.
|