|
Detailed Product Description
Detailed Product Description
HBM is VKK2R-8Ex EEx junction box complies with ATEX 95 for flameproof enclosures.
VKK2R-8 Ex - VKK2R-8 Ex - ATEX 95 junction box
HBM's VKK2R-8Ex EEx junction box complies with ATEX 95 for flameproof enclosures. The junction box is suitable for load cells used in potentially explosive atmospheres such as in truck scales in the petrochemical industry. Using the junction box allows customary standard weighing electronics to be connected outside the hazardous area without needing intermediates such as safety barriers.
Up to eight analog strain gage load cells complying with EMC requirements can be easily connected to the new junction box. The VKK2R-8Ex EEx junction box also features EMC-compliant metric screwed cable glands to ensure full EMC compliance as per EN45501 thanks to HBM’s shielding design.
The junction box features an internal resistor network to integrate HBM’s special, highly precise, and reliable corner load balancing feature into in a scale. This means that results can be obtained in three simple steps:
load scale corners,
read correction value from diagram,
activate balancing resistor.
This VKK2R-8Ex EEx junction box has been marked II 2 G/D and II3 for use in potentially explosive atmospheres and is supplied with the requisite PTB 05 ATEX 2014 type examination certificate issued by PTB (German Metrology Institute). The junction box can be used for protection in Zones 1, 2, 21, 22.
Key Feature(s)
EC-type examination certificate PTB05 ATEX 2014
Parallel connection of up to 8 load cells for use in potentially explosive atmospheres
Corner balancing via integrated resistor network
Housing in stainless steel
Marking II 2 G EEx ia IIC T4 (for Zone 1)
Marking II 2 D IP65 T 80 °C (for Zone 21)
Marking II 3 G EEx nA IIC T4 (for Zone 2)
Marking II 3 D IP65 T 80 °C (for Zone 22)
|
