DO NOT OVERTIGHTEN the walking belt. This may reduce motor performance and excessive roller wear.

TO CENTER WALKING BELT:

● Place treadmill on a level surface

● Run treadmill at approximately 3.5 mph

● If the belt has drifted to the right, turn the right adjusting bolt 1/2 turn clockwise and the left adjusting bolt 1/2 turn counterclockwise

● If the belt has drifted to the left, turn the left adjusting bolt 1/2 turn clockwise and the right adjusting bolt 1/2 turn clockwise and the right adjusting bolt 1/2 turn counterclockwise